Jump to content


  • Content Count

  • Joined

  • Last visited

  • Speed Test

    My Results

About **eagle**

  • Rank
    Sr. Member
  • Birthday 01/01/1

Contact Methods

  • Website URL

Profile Information

  • Gender
  1. you can run a AM3 processor in a XFX 750a Sli Mobo with a bios update and only limited to am3 x3 720be... bummer. well there are some good sides and bad sides to this. good side AM2+ are pretty cheap now. bad side is you cant find any good ones at a 95w maximum . so i can go buy one for like 75-80 bucks to get a few more ghz. right now i have Amd phenom x4 9500 at 2.2ghz. and i must say its poop. "my god! there isnt anything for AM2 95w" ok guess its a new mobo... thanks guys !
  2. Thanks, Helps alot. Ok so i have a litle program called SiSOft sandra. tells ya alot about your pc. Looking at my processor section i see "*package* Socket AM2r2/AM3" Another thing that caught my eye is "*Maxumum Power* 128.99W So from what i see there my board is capable of running both processors and i am able to purchase one thats 125w still iffy about that have to look more into it. .. agreed ? ok guess i am limited to 95w. Thanks for the replay back. And i know i am like a ghost 000ooo000ooo00. thanks for the welcome back
  3. Hey guys, notice i always come here for my pc problems . And thats because you guys are the best and always very helpful. well here is my question. Right now i have a... will post specs of my mobo here http://www.motherboards.org/reviews/motherboards/1801_2.html hope that shows. i want to update my cpu its kinda weak. Now i have read that you are able to put a AM3 Processor in a AM2+ socket due to the fact that AM3 processors are actually missing some pins. so as long as i keep to a 95w for a processor on my current mobo, i am good? I just wanted to double check with you guys before i go ahe
  4. ya. i am just wondering what the first GPU actually is since its so high, all the time. Ive tried searching the web with no luck. my hybrid sli is turned off and its still there so i am even more puzzled.
  5. Hello again. i am once again counting on the community to help me out here. OK, so here is my problem. i found out that my 8800 gts (640MB) had physx GPU acceleration about a month ago so i downloaded what i needed too and set that up worked fine. then i found out that my motherboard supported hybrid SLI so i enabled that in my BIOS worked fine. 3 weeks later i purchased another 8800gts and got it working in SLI mode. I actually have two questions here first one is, will me running hybrid SLI and SLI together will this cause any problems or is hybrid useless now since i got real SLI ? And my o
  6. GPU 60c System 28c Cpu 36c Hd0 32c Core 31c Core 60c too many cores thats what i got :/
  7. i have a thermaltake Agulia, well the only thermal paste that got used was the one that was already stuck to the bottom of the heatsink. and voltage is 1.23v my bad. shoul di try to apply better thermal paste ? if i can avoid messing with the voltage. first time so i guess i should read up on it see what i can do, the bios isnt very friendly so i guess i should maybe shoot for a 1.15v ? oh nm that was pretty easy. set it too 1.15v cleaned heatsink abit, and found some left over thermal paste CPU is 36c core is 60c sound right ?
  8. I have a AMD Phenom 9500 Quad Core Processor 2.2GHz 4MB cache 95W Thermal Design Power Processor i have it set at 1.24v now i didnt do anythign in bios its just what the motherboard picked it up as. Is this a safe voltage for it ? its got me worried cause at idel it is running at 56-58c and i beleave it runs around 66c i think thats like while gaming is this to hot ? Thanks for reading
  9. Ok, i figured it out. this is a SLI motherboard right, usaully the first PCIE closet to the Processor would be the primary. which it wasnt it was PCIE slot 2 that was the primary. i did try both slots before hand and they both didnt work, restroe bios to default and added it in slot listed PCIE 2 and all fixed works good now. i dont know why they would do that . i knew i could count on ur guys for help ! now its time for more questions and ty for answering my questions.
  10. i am hoping someone here can help me. i started building a PC using the XFX 750Sli nFORCE motherboard http://www.tigerdirect.com/applications/SearchTools/item-details.asp?Sku=P450-9118 got a http://www.amazon.com/AMD-HD9500WCGDBOX-Phenom-Processor-Thermal/dp/B000YPP7F4/ref=sr_1_1?ie=UTF8&s=electronics&qid=1231305249&sr=8-1 and also http://www.newegg.com/Product/Product.aspx?Item=N82E16820145043 now i have a Geforce 8800 GTS http://www.newegg.com/Product/Product.aspx?Item=N82E16814130071 from my old system. well i add the card plug the monitor to it and monitor just blinks
  11. well i will double check everthing to make sure
  12. alright well my OS cd is acting up . so i tried using one from a diff pc still same crap i took the battery out for like 10 mins and nothing... man this sucks i guess i will have to get someone who knows what they are doing unlike me to get it too work again. but thanks anyways guys youve been a big help, sorry you chouldnt help me
  13. ok here we go Clock speed 2.17 GHz Processor type Athlon XP Installed processor qty 1 Max supported processor qty 1 Processor manufacturer AMD Processor performance index 3000+ RAMRAM installed 512 MB Max supported RAM 2 GB Memory specification compliance PC2700 Memory speed 333 MHz RAM form factor DIMM 184-pin RAM technology DDR SDRAM Video OutputGraphics processor NVIDIA GeForce4 MX Video output form factor Integrated Video output interface type AGP Video output type Graphics adapter Display (Projector)Display type None. Service & Sup
  14. and ya the first tiem the post came up, ok well let me post some of the specs here give me abit thanks
  • Create New...