DanM
-
Posts
42 -
Joined
-
Last visited
Never -
Speed Test
My Results
Posts posted by DanM
-
-
ok...i'll do that right now and post afterwards, thx
-
I posted in this thread about some problems I had with optonline being only 19%: https://testmy.net/forum/t-6920'>https://testmy.net/forum/t-6920
I was at 19%...I changed my MTU to 1494 on my router (followed the instructions in a linksys knowledgebase article about how to determine the optimal MTU), downloaded DRTCP, and changed the MTU on my computer as well.
After doing that, I am now at 26.5% of optonline's average.
:::.. Download Stats ..:::
Connection is:: 1701 Kbps about 1.7 Mbps (tested with 2992 kB)
Download Speed is:: 208 kB/s
Tested From:: https://testmy.net/ (server2)
Test Time:: Tue Aug 2 21:59:55 EDT 2005
Bottom Line:: 30X faster than 56K 1MB download in 4.92 sec
Diagnosis: May need help : running at only 26.5 % of your hosts average (optonline.net)
Validation Link:: https://testmy.net/stats/id-IJLYRWFNM
1. I am using Windows XP Professional.
2. I am using optimum online and the advertised speed for download is "up to 10,000 kbps" and I could not find an advertised upload speed.
3. I have never used any kind of tweak program. But here are the results from the broadband reports thing: http://ttester.broadbandreports.com/tweak/block:d9f45e?service=cable&speed=9999&os=winXP&via=normal
4. Results of speed are posted up there for testmy.net, but here are the nitro.usc results:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 776.23Kb/s
running 10s inbound test (server to client) . . . . . . 1.16Mb/s
Your PC is connected to a Cable/DSL modem
Information: The receive buffer should be 43.98 Kbytes to maximize throughput
5. No protocols
6. Nothing is checked
7. I am using a wireless linksys router, all the network adapters are connected via USB...there are no computers wired directly into the router.
8. I did power cycle it.
9. I run ad-aware and microsoft's regularly.
10. Not using Zonealarm.
11. I'm using Windows Firewall...I do have a McAfee thing installed, but not the firewall...just for virus protection.
12. Scanned for viruses, don't have any.
13. Have all of the latest windows updates.
14. I ran CCleaner.
15. I looked at VanBuren's cablenut thing, but didn't know what to do, and was scared to change anything or do anything withour knowing what I'm doing.
Just a quick recap of my setup: I have a split-level house, downstairs is the cable modem (motorola surfboard) and a linksys wireless router right next to it. Upstairs are two desktop computers, both with usb wireless network adapters. Both are running Windows XP Professional.
I had 5.8 ghz phones, but they're all unplugged. I do have two old 900 mhz phones, and could install them...but really, I only need my one corded phone setup for now.
So...what else can I do to improve the speed? I don't know anything about RWIN and haven't changed any settings. Seems like I need to know the advertised speed to calculate the correct RWIN? I spoke to optonline over the livechat and they said 10,000 kbps as the advertised download speed? Is that even possible?
thanks very much
-
yeah...well all the phones are unplugged now.
i found out using linksys's knowledgebase that my MTU should be 1494.
i haven't changed anything in my registry, but i did download DRTCP and i'm going to change that.
so after doing that, if i still have problems, i'll post in the make it faster forum...thanks very much
-
umm...why was this moved to optimum online?
this applies to making a connection faster, it has nothing specifically to do with optimum online as netmasta showed.
i just put optimum online as the topic in case someone had similar problems, but now i see it's a general networking issue.
i bet a lot of people don't know this about 5.8 ghz phones and MTU...
-
thanks
i think i know what a BIG problem is: http://www.tomsnetworking.com/FAQ-37-Performance-16.php#481
most 5.8 ghz phones ALSO transmit on 2.4 ghz, so they use both...the only safe ones are TRUE 5.8 ghz phones (tom says uniden) OR 900 mhz phones....
i bet that is causing a lot of the problem!
-
one other thing...is it possible that my wireless network adapters will figure out the right MTU and set it correctly in the computer?
or is this a software thing i must do myself?
because the only thing i changed was on the router itself.
-
Thank you VERY much, netmasta
that is exactly what i was looking for.
-
Someone sent me a PM telling me I'm rude...I'm not trying to be rude, I'm just frustrated that hours of Linksys tech support from an Indian call center haven't helped at all.
I already know the basics of networking...this isn't a basic question that any computer literate person could guess at. So if someone is aware of the pros/cons of lowering MTU, please let me know or direct me to where I can find out.
That's all...I'm not looking to get into a pissing match, and honestly I don't think I was rude, but for anyone who was offended, I'm sorry.
-
Then why would I only be running at 20%? It can't just be the plan, and I don't download enough to be capped by far.
Look....I just want to speed up my connection...if this isn't the forum for that, can someone please kindly tell me where I should go to figure it out? I kinda already know what's been said so far intuitively....specifically, I need to know about MTU's.
thanks
-
so does anyone here know ANYTHING about MTU's?
-
So...does anyone know how I can increase this, and what are the pros/cons of lowering MTU further?
-
humorman.....i'm not goign anywhere near 11 mbps...
even if my wireless network was capable of 54...i'm still not even pulling 2 mbps.
i'm not using my wireless network to its full capacity, so why would it matter if i increased it?
-
hmmm that optonline speedcheck site says i'm doing 2089 kbps??
-
but are you on wireless jimmy?
what do you think ic an do to fix it?
i was very surprised i was only at 20% of optonline
-
no i don't think so....
11 mbps is still faster than the speed of my cable modem, and i have a good signal.
why would it make a difference?
-
Please see http://www.testmy.net/forum/t-6967 for more information.
:::.. Download Stats ..:::
Connection is:: 1261 Kbps about 1.3 Mbps (tested with 2992 kB)
Download Speed is:: 154 kB/s
Tested From:: https://testmy.net/ (server1)
Test Time:: Mon Aug 1 17:18:23 EDT 2005
Bottom Line:: 23X faster than 56K 1MB download in 6.65 sec
Diagnosis: May need help : running at only 19.54 % of your hosts average (optonline.net)
Validation Link:: https://testmy.net/stats/id-YNRDS12TE
Those are my stats...this is my setup:
Split-level house, downstairs is the cable modem and right by it is a linksys 802.11b wireless router with a linksys high gain antenna I added.. Upstars are two desktop computers- one has a Linksys Wireless-B USB network adapter, the other has a Belkin 802.11b wireless usb adapter.
Why is it only at 19.54%? Is that because of how many people are using it with a wired connection? There are no 2.4 GHz phones in the phone, they're all 5.8 GHz. I spoke to Linksys about this, and the guy had me lower my MTU to 1492 and that improved it by maybe 10 Kbps, and that test I just did is with the lowered MTU.
What can I do to improve this? Should cable be like twice the speed? I very much doubt I download enough to be capped.
thanks
Why is it only 19.54%? There are Excellen
Optonline - 19.54% ?
in Make it Faster...
Posted
ok one question...should my MTU be 1500 or 1494 (1494 is what i figured it out that it should be by using a linksys knowledgebase article...basically i pinged google with some settings and they said to keep readjusting until i got a fragmented packet...anyway i ended up with 1494).
so which should i do in that screenshot you gave me? the router is set to 1494 currently.