mbrainerd

:::.. Download Stats ..:::

Connection is:: 1636 Kbps about 1.6 Mbps (tested with 2992 KB)

Download Speed is:: 200 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 29 times faster than 56K you can download 1MB in 5.12 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=2CVHKY408

:::.. Upload Stats ..:::

Connection is:: 635 Kbps about 0.6 Mbps (tested with 1496 KB)

Upload Speed is:: 78 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 11 times faster than 56K you can upload 1MB in 13.13 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=YHWO78CI3

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 764.40Kb/s

running 10s inbound test (server to client) . . . . . . 1.45Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 113.99 msec; the Packet size = 1460 Bytes; and

There were 50 packets retransmitted, 84 duplicate acks received, and 91 SACK blocks received

The connection stalled 1 times due to packet loss

The connection was idle 0.33 seconds (3.30%) of the time

This connection is network limited 99.96% of the time.

  Contact your local network administrator to report a network problem

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [66.117.105.128] but Client says [172.25.25.2]

Duration: 10260154

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

Checking for mismatch condition

(cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [26280>0],

(PktsRetrans/sec > 2) [5.0>2], (estimate > 2) [1.58>2]

Checking for mismatch on uplink

(speed > 50 [1.50>50], (xmitspeed < 5) [0.76<5]

(rwintime > .9) [0>.9], (loss < .01) [0.00<.01]

Checking for excessive errors condition

(loss/sec > .15) [3.78>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [0.00<.01], (MaxSsthresh > 0) [26280>0]

Checking for 10 Mbps link

(speed < 9.5) [1.50<9.5], (speed > 3.0) [1.50>3.0]

(xmitspeed < 9.5) [0.76<9.5] (loss < .01) [0.00<.01], (link > 0) [100>0]

Checking for Wireless link

(sendtime = 0) [3.63=0], (speed < 5) [1.50<5]

(Estimate > 50 [1.58>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (link > 0) [100>0]

Checking for DSL/Cable Modem link

(speed < 2) [1.50<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.6373870674782157E-4=0], (link > 0) [100>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [100<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [26280>0]

bw = 1.58 based on packet size = 11Kbits, RTT = 113.99msec, and loss = 0.0037850113585591316

The theoretical network limit is 1.58 Mbps

The transmit buffer (101.0 KByte) limits the application to 6.92 Mbps

Your receive buffer (256.0 KByte) limits the application to 17.54 Mbps

The network based flow control limits the application to 3.51 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

TCP/Web100 Network Diagnostic Tool v5.2.1e

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 764.40Kb/s

running 10s inbound test (server to client) . . . . . . 1.45Mb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

http://ttester.broadbandreports.com/tweak/block:5bb6795?service=dsl&speed=2048&os=winXP&via=normal

:::.. Download Stats ..:::

Connection is:: 1578 Kbps about 1.6 Mbps (tested with 2992 KB)

Download Speed is:: 193 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 28 times faster than 56K you can download 1MB in 5.31 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=01RPEGNLW

:::.. Upload Stats ..:::

Connection is:: 717 Kbps about 0.7 Mbps (tested with 1496 KB)

Upload Speed is:: 88 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.64 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=N3BYU0P4O

http://ttester.broadbandreports.com/tweak/block:11d2336?service=dsl&speed=2048&os=winXP&via=normal

They changed me to fastpath from interleave. new tracert; Seems like I lost a little speed might need other tweaks.

Microsoft Windows XP [Version 5.1.2600]

© Copyright 1985-2001 Microsoft Corp.

C:Documents and SettingsEnd User>tracert testmy.net

Tracing route to testmy.net [67.19.36.6]

over a maximum of 30 hops:

  1    6 ms    1 ms    1 ms  10.0.0.13

  2    *        *        *    Request timed out.

  3    12 ms    11 ms    10 ms  gf-dyn-gateway.gtec.net [66.117.105.1]

  4    15 ms    11 ms    11 ms  t3-gw.gtec.net [66.117.96.1]

  5    16 ms    16 ms    20 ms  Serial4-11.GW8.STL3.ALTER.NET [157.130.174.41]

  6    22 ms    16 ms    19 ms  186.at-6-0-0.XL2.STL3.ALTER.NET [152.63.92.34]

  7    16 ms    16 ms    18 ms  0.so-1-0-0.TL2.STL3.ALTER.NET [152.63.88.245]

  8    31 ms    32 ms    34 ms  0.so-5-2-0.TL2.DFW9.ALTER.NET [152.63.1.149]

  9    34 ms    31 ms    35 ms  0.so-7-0-0.CL2.DFW13.ALTER.NET [152.63.103.222]

10    35 ms    31 ms    32 ms  POS7-0.GW1.DFW13.ALTER.NET [152.63.103.89]

11    35 ms    32 ms    32 ms  theplanet-gw.customer.alter.net [157.130.143.226

]

12    35 ms    31 ms    31 ms  dist-vlan31.dsr3-2.dllstx3.theplanet.com [70.85.

127.30]

13    36 ms    32 ms    33 ms  dist-vlan22.dsr1-2.dllstx2.theplanet.com [70.85.

127.76]

14    35 ms    32 ms    33 ms  dsr2-1-v2.dllstx4.theplanet.com [12.96.160.39]

15    35 ms    31 ms    32 ms  gig1-0-2.tp-car9-2.dllstx4.theplanet.com [67.18.

116.86]

16    35 ms    33 ms    36 ms  6.67-19-36.reverse.theplanet.com [67.19.36.6]

Trace complete.

C:Documents and SettingsEnd User>

Just sent them to my ISP. I will let you know what they tell me. I will probably have to call them everyday for a week to ge tthem to do it. They  checked my line when they first installed, said line coming into my home was good for 7 meg down and 1 meg up so I have good signal strength.

Thanx again. 

Thanx! I had found some other listings at dslreports. I am hoping they will do this.  I might see if they will offer you a job!

hey mbrainerd

all i know is that my ISP can disable error correction and use fastpath on the users that want so, it dosent affect other customers.

they fix this in a few minutes

VanBuren

Just got off the phone  with my lead tech person. He has no idea what I am talking about. He said he will do it if he knows how. Is there a place on the net that gives a tutorial? Remember Van I live in a small town these tech's are still learning.

Found info on internet that I emailed tech support so hopefully they will use it.

Cool thanx. I am calling them now!!!! I will let you know !

hey mbrainerd

the test is not bad, but you should ask your ISP if they can reduce your first hop ping (gateway) by using fastpath, these interleaved error corrections many times make more damage then good.

If you have a good signal the ISP can disable the error correction and that will reduce your first hop ping to around 5-10 ms

The error correction helps your modem to be synced and reduce loss to gateway, i can see you have a 1-2 % of loss even tho your using interleaved service so you might have some problems with very low signal

I have seen alot of ppl with ADSL with my ISP that have the very same problems, they called support and if modem signal was good they switched over them to use fastpath. Ping and speed got alot better....

VanBuren

Hey Van,

Is this s/thing my ISP can do just for me? Or does it effect every customer. I always have a lot of problems with talking to my ISP. It seems everyone on this board is smarter than my ISP. Just like to have my ducks in a row b4 I call them.

Best Speed yet! Finally hit my cap!!!!

:::.. Download Stats ..:::

Connection is:: 2166 Kbps about 2.2 Mbps (tested with 2992 KB)

Download Speed is:: 264 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 39 times faster than 56K you can download 1MB in 3.88 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=LF56Z1PBM

Thats pretty good. For me, i always Fail The "From West Coast - USA to YOU" 

:-

I normally failed to, first time I ran the line quality since I had my speed bumed to 2048/1024

Thanks Van your the greatest!!! That has been my problem is the first hop.

This time I passed on everything.  http://www.dslreports.com/quality/nil/1631780

Any feeedback would be appreciated!!

Give it a little time someone will help, in the mean time you need to post your advertised speeds what package you are on . And go here Please read topic and linked topics posted at https://testmy.net/forum/index.php?topic=1013 [testmy.net]

Please contribute any knowledge you may have to the forum. Your tips may help others in the quest for increased throughput. All contributions are greatly appreciated and sometimes rewarded.

Wow! No tweaks and you are close to your cap. Least you wont have as far to go as what I did.

Good Luck

:::.. Download Stats ..:::

Connection is:: 1939 Kbps about 1.9 Mbps (tested with 2992 KB)

Download Speed is:: 237 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 35 times faster than 56K you can download 1MB in 4.32 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=GJHENRKI2

:::.. Upload Stats ..:::

Connection is:: 743 Kbps about 0.7 Mbps (tested with 2992 KB)

Upload Speed is:: 91 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.25 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=26QVSKEU1

Have rwin set to 20440 Do not think I will get much better on download.  Upload is not bad about 75% of my cap.

Thanx 4 all your help. Van 

You be the man. I hope u do this stuff 4 a living!!!

OK,  have to go and take a break . Will post results.

Thanx 4 all the help. Will keep adjusting!!

:::.. Download Stats ..:::

Connection is:: 1236 Kbps about 1.2 Mbps (tested with 2992 KB)

Download Speed is:: 151 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 22 times faster than 56K you can download 1MB in 6.78 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=I9PBJOKQU

:::.. Upload Stats ..:::

Connection is:: 729 Kbps about 0.7 Mbps (tested with 1013 KB)

Upload Speed is:: 89 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.51 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=CBPHOFSZ2

http://ttester.broadbandreports.com/tweak/block:2284b00?service=dsl&speed=2048&os=winXP&via=normal

Upload is stayin ghte same but download is bad.

:::.. Download Stats ..:::

Connection is:: 1184 Kbps about 1.2 Mbps (tested with 2992 KB)

Download Speed is:: 145 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 21 times faster than 56K you can download 1MB in 7.06 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=NRKJYUPQW

:::.. Upload Stats ..:::

Connection is:: 736 Kbps about 0.7 Mbps (tested with 1496 KB)

Upload Speed is:: 90 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.38 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=P5NGQC28S

http://ttester.broadbandreports.com/tweak/block:3131375?service=dsl&speed=2048&os=winXP&via=normal

I left everything alone this time.

there is 3 types of RWIN, what RWIN did you change?

DefaultReciveWindow

TcpWindowSize

GlobalMaxTcpWindowSize

i suggest to use the file i attach and i will modify it for you, cos if you change wrong, things might get worce, and i have no chanse to find out whats wrong.

so please reload the latest file i posted and we will work from that, i will modify it until its perfect.

VanBuren

Default Rec. Window. All the other settings are in tact. When I used the original settings with the file my download speeds dropped to about 1.2 once I changed it back to 20440 my speeds went to 1.7 which I am averaging now. Upload is still around 0.7

Thanx!!!

  I do not think I am going to get much better than that but if you think your can make it faster I am all for it.

I have the Lingo router for voip! How do I change the setting?

I lowered my rwin to 20440 and got this result 

:::.. Download Stats ..:::

Connection is:: 1649 Kbps about 1.6 Mbps (tested with 2992 KB)

Download Speed is:: 201 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 29 times faster than 56K you can download 1MB in 5.09 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=C2GF7TZX8

From earlier post.

http://ttester.broadbandreports.com/tweak/block:6e043a?service=dsl&speed=2048&os=win2k&via=normal

The latest ones you gave me. The only thing I changed was the rwin if I keep it at 20440 everything seems to run smoother.

:::.. Download Stats ..:::

Connection is:: 1720 Kbps about 1.7 Mbps (tested with 2992 KB)

Download Speed is:: 210 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 31 times faster than 56K you can download 1MB in 4.88 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=G6PDU8BJW

:::.. Upload Stats ..:::

Connection is:: 695 Kbps about 0.7 Mbps (tested with 1496 KB)

Upload Speed is:: 85 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 12 times faster than 56K you can upload 1MB in 12.05 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=EBJQ4Z1WO

TCP/Web100 Network Diagnostic Tool v5.2.1e

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 528.35Kb/s

running 10s inbound test (server to client) . . . . . . 1.12Mb/s

Your PC is connected to a Cable/DSL modem

Link set to Full Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 132.77 msec; the Packet size = 1460 Bytes; and

There were 1 packets retransmitted, 12 duplicate acks received, and 13 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is receiver limited 69.03% of the time.

  Increasing the current receive buffer (19.0 KB) will improve performance

This connection is network limited 30.92% of the time.

  Contact your local network administrator to report a network problem

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [66.117.105.128] but Client says [172.25.25.2]

(SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [100<=10]

Checking for congestion

(cwndtime > .02) [0.30>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [10220>0]

bw = 2.60 based on packet size = 11Kbits, RTT = 132.77msec, and loss = 0.001038421643897891

The theoretical network limit is 2.60 Mbps

The transmit buffer (101.0 KByte) limits the application to 5.94 Mbps

Your receive buffer (19.0 KByte) limits the application to 1.17 Mbps

The network based flow control limits the application to 1.25 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'T1'

Hope you understand all of this.

:::.. Download Stats ..:::

Connection is:: 1676 Kbps about 1.7 Mbps (tested with 2992 KB)

Download Speed is:: 205 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 30 times faster than 56K you can download 1MB in 5 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=VA7EM1NH9

:::.. Upload Stats ..:::

Connection is:: 706 Kbps about 0.7 Mbps (tested with 1013 KB)

Upload Speed is:: 86 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.91 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=M3J1T7WGA

I was on my Lingo phone during tests. I gues that might suck up some of my speed. I also have a call into my isp, to see if they actually bumbed me to the 2048/1024 and not the 1.5/768.

Getting better!

:::.. Download Stats ..:::

Connection is:: 1718 Kbps about 1.7 Mbps (tested with 2992 KB)

Download Speed is:: 210 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 31 times faster than 56K you can download 1MB in 4.88 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=85T017BCV

:::.. Upload Stats ..:::

Connection is:: 734 Kbps about 0.7 Mbps (tested with 2992 KB)

Upload Speed is:: 90 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 13 times faster than 56K you can upload 1MB in 11.38 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=BMTOPWC8V

How do I manual;ly do the nic? :

this is what slowing you down

Web100 reports the Round trip time = 155.90 msec; the Packet size = 1460 Bytes; and

There were 42 packets retransmitted, 1 duplicate acks received, and 42 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

  Contact your local network administrator to report a network problem

all the re transmissions, have you set your NIC duplexmode manually?

If you not using a router and connect directly to modem, run NIC in Autosense

if you using a router force 100 Mbps full duplex

VanBuren

I have the Lingo router for voip! How do I change the setting?

I lowered my rwin to 20440 and got this result

:::.. Download Stats ..:::

Connection is:: 1649 Kbps about 1.6 Mbps (tested with 2992 KB)

Download Speed is:: 201 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 29 times faster than 56K you can download 1MB in 5.09 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=C2GF7TZX8