x00cooper1 Posted February 20, 2006 CID Share Posted February 20, 2006 I have found this place and I am trying to get the best speed for my laptop. When at home I wire connect the laptop to my linksys broadband router. I have noticed that my speed is somewhat slow. :::.. Download Stats ..::: Connection is:: 963 Kbps about 1 Mbps (tested with 748 kB) Download Speed is:: 118 kB/s Tested From:: https://testmy.net (server1) Test Time:: Sun Feb 19 2006 23:00:28 GMT-0500 (Eastern Standard Time) Bottom Line:: 17X faster than 56K 1MB download in 8.68 sec Diagnosis: May need help : running at only 20.17 % of your hosts average (comcast.net) Validation Link:: https://testmy.net/stats/id-CYEOLKQW1 :::.. Upload Stats ..::: Connection is:: 76 Kbps about 0.1 Mbps (tested with 97 kB) Upload Speed is:: 9 kB/s Tested From:: https://testmy.net (server1) Test Time:: Sun Feb 19 2006 23:01:23 GMT-0500 (Eastern Standard Time) Bottom Line:: 1X faster than 56K 1MB upload in 113.78 sec Diagnosis: May need help : running at only 22.09 % of your hosts average (comcast.net) Validation Link:: https://testmy.net/stats/id-03BM9GQIF I have Comcast cable internet on Windows XP Pro. I dl Cablenut and used VanBurens_cablenut_settings_version_8 css settings. Nothing really changed. TCP/IP Analyzer results: TCP options string = 020405b401010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default TCP Receive Window (RWIN) = 46720 RWIN Scaling (RFC1323) = 0 bits Unscaled TCP Receive Window = 46720 RWIN is a multiple of MSS Other RWIN values that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 256960 (MSS x 44 * scale factor of 4) 128480 (MSS x 44 * scale factor of 2) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your TCP Window limits you to: 1868.8 Kbps (233.6 KBytes/s) @ 200ms Your TCP Window limits you to: 747.52 Kbps (93.44 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 51 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00100000 (32) Precedence (priority) = 001 (priority) Delay = 0 (normal delay) Throughput = 0 (normal throughput) Reliability = 0 (normal reliability) Cost = 0 (normal cost) Check bit = 0 (correct, 8th checking bit must be zero) DiffServ (RFC 2474) = CS1 001000 ( - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field. Any help would be great. Quote Link to comment Share on other sites More sharing options...
trogers Posted February 20, 2006 CID Share Posted February 20, 2006 What is your subscribed speed? Did you using wireless to test? Quote Link to comment Share on other sites More sharing options...
FGOKURULES Posted February 20, 2006 CID Share Posted February 20, 2006 What Speed Package do You have from your Internet Provider? Quote Link to comment Share on other sites More sharing options...
x00cooper1 Posted February 20, 2006 Author CID Share Posted February 20, 2006 I did not use wireless, i disabled it to test the wired speed. Advertised speed: 6 Mbps/384 Kbps connection Quote Link to comment Share on other sites More sharing options...
trogers Posted February 20, 2006 CID Share Posted February 20, 2006 Please do the following and post: https://www.speedguide.net/analyzer.php Tracert to www.testmy.net Quote Link to comment Share on other sites More sharing options...
x00cooper1 Posted February 20, 2006 Author CID Share Posted February 20, 2006 TCP options string = 020405b40103030101010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default TCP Receive Window (RWIN) = 93824 RWIN Scaling (RFC1323) = 1 bits (scale factor of 2) Unscaled TCP Receive Window = 46912 RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP 1323 Options. You might want to use one of the recommended RWIN values below. For optimum performance, consider changing RWIN to a multiple of MSS. Other RWIN values that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 256960 (MSS x 44 * scale factor of 4) 128480 (MSS x 44 * scale factor of 2) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your TCP Window limits you to: 3752.96 kbps (469.12 KBytes/s) @ 200ms Your TCP Window limits you to: 1501.184 kbps (187.648 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 51 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00100000 (32) Precedence (priority) = 001 (priority) Delay = 0 (normal delay) Throughput = 0 (normal throughput) Reliability = 0 (normal reliability) Cost = 0 (normal cost) Check bit = 0 (correct, 8th checking bit must be zero) DiffServ (RFC 2474) = CS1 001000 ( - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field. Quote Link to comment Share on other sites More sharing options...
trogers Posted February 20, 2006 CID Share Posted February 20, 2006 Please do a tracert to www.testmy.net. Quote Link to comment Share on other sites More sharing options...
x00cooper1 Posted February 20, 2006 Author CID Share Posted February 20, 2006 is there a quick way to copy info from tracert into here? Quote Link to comment Share on other sites More sharing options...
trogers Posted February 20, 2006 CID Share Posted February 20, 2006 Just click right on the DOS screen and choose 'select all' then paste in quick reply box. Quote Link to comment Share on other sites More sharing options...
FallowEarth Posted February 20, 2006 CID Share Posted February 20, 2006 Looks like your receive window is a little small. It could be that the router is specifying it, but I would try cablenut. Get the program here: www.cablenut.com Then extract the "Cable & DSL 6000 512" custom file found in Van Buren's cablenut setting v.7: [LINK] Click save to registry, then close and reboot your computer. After that, try another speedtest and the analyzer at https://www.speedguide.net/analyzer.php Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.