wak_wak Posted June 18, 2006 CID Share Posted June 18, 2006 Hello guys, i need a help for my connection, i just sucessfuly connected two PC's using a router (linksys BEFSR41), the problem is the two PC's got different speed, PC1 had 256 Kbps but PC2 had only 16 Kbps, what should i do? i cant access the router using the http://192.168.1.1 can someone help me with this, how could i set the router so they would have the same speed. thanks alot Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 or maybe i configure the router in a wrong way ( i use the cd when i configure it), can someone help me how to configure it in other way step by step.. thanx Quote Link to comment Share on other sites More sharing options...
Swimmer Posted June 19, 2006 CID Share Posted June 19, 2006 sounds like a spyware issue.. do a scan then you might want to see if your NIC has newer drivers.. ethernet should be pretty stable to all of the computers.. I am not sure what this "cd" does.. I have never used their configuration cds in the past.. however, you stil should be able to access 192.168.1.1.. You might also want to do a reset, holding the reset button on the back of the router with a paperclip or pin.. Quote Link to comment Share on other sites More sharing options...
dlewis23 Posted June 19, 2006 CID Share Posted June 19, 2006 have you tried reseting your router? Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 yeah, i have done it already.. After plugging the modem to the router then plugging the cables for the 2 pc, what should i do? Network wizard? im using Windows XP.. thanx Quote Link to comment Share on other sites More sharing options...
Swimmer Posted June 19, 2006 CID Share Posted June 19, 2006 You shouldnt need to do anything.. just make sure you have an IP address on the computer.. start -> run type cmd press enter -> type ipconfig /all press enter. Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 on my router what should i use? obtain ip automatically or the PPPoE? Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 my service provider provided me a username and a password everytime i logon.. Quote Link to comment Share on other sites More sharing options...
dlewis23 Posted June 19, 2006 CID Share Posted June 19, 2006 on my router what should i use? obtain ip automatically or the PPPoE? well that depends on your ISP. Quote Link to comment Share on other sites More sharing options...
dlewis23 Posted June 19, 2006 CID Share Posted June 19, 2006 my service provider provided me a username and a password everytime i logon.. o then try PPPoE. Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 now i configure my router and in the status it said im connected, so now im going to run this command on both computer "start -> run type cmd press enter -> type ipconfig /all press enter?" Quote Link to comment Share on other sites More sharing options...
dlewis23 Posted June 19, 2006 CID Share Posted June 19, 2006 now i configure my router and in the status it said im connected, so now im going to run this command on both computer "start -> run type cmd press enter -> type ipconfig /all press enter?" well if it says your connected then you should be able to get on the internet no problem with out doing that. Quote Link to comment Share on other sites More sharing options...
wak_wak Posted June 19, 2006 Author CID Share Posted June 19, 2006 thanx.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.