networking problem

[wak_wak 0]

Hello guys, i need a help for my connection, i just sucessfuly connected two PC's using a router (linksys BEFSR41), the problem is the two PC's got different speed, PC1 had 256 Kbps but PC2 had only 16 Kbps, what should i do?

i cant access the router using the http://192.168.1.1 

can someone help me with this, how could i set the router so they would have the same speed.

thanks alot 

[wak_wak 0]

or maybe i configure the router in a wrong way ( i use the cd when i configure it), can someone help me how to configure it in other way step by step.. thanx

[Swimmer 3]

sounds like a spyware issue.. do a scan then you might want to see if your NIC  has newer drivers..  ethernet should be pretty stable to all of the computers.. I am not sure what this "cd" does.. I have never used their configuration cds in the past.. however, you stil should be able to access 192.168.1.1..  You might also want to do a reset, holding the reset button on the back of the router with a paperclip or pin..

[dlewis23 3]

have you tried reseting your router?

[wak_wak 0]

yeah, i have done it already..

After plugging the modem to the router then plugging the cables for the 2 pc, what should i do? Network wizard? im using Windows XP..

thanx

[Swimmer 3]

You shouldnt need to do anything.. just make sure you have an IP address on the computer..

start -> run type cmd press enter -> type ipconfig /all press enter.

[wak_wak 0]

on my router what should i use? obtain ip automatically or the PPPoE?

[wak_wak 0]

my service provider provided me a username and a password everytime i logon..

[dlewis23 3]

on my router what should i use? obtain ip automatically or the PPPoE?

well that depends on your ISP.

[dlewis23 3]

my service provider provided me a username and a password everytime i logon..

o then try PPPoE.

[wak_wak 0]

now i configure my router and in the status it said im connected, so now im going to run this command on both computer "start -> run type cmd press enter -> type ipconfig /all press enter?"

[dlewis23 3]

now i configure my router and in the status it said im connected, so now im going to run this command on both computer "start -> run type cmd press enter -> type ipconfig /all press enter?"

well if it says your connected then you should be able to get on the internet no problem with out doing that.

[wak_wak 0]

thanx..