OLDJIMMYBONES Posted October 11, 2007 CID Share Posted October 11, 2007 I have OptOnline with boost which is supposto be 30mb down and 3mb up, testmy says im at 28% of adverage with out boost, i get 6mb down and 300kb up, i have a linksys router (wrt54g) i tryed cablenut which made it 6mb down was at 3mb, but trying to get closer to the advertised speed. any ideas? cable nut settings: DefaultReceiveWindow = 9216000 DefaultSendWindow = 128000 DisableAddressSharing = 1 InitialLargeBufferCount = 200 InitialMediumBufferCount = 480 InitialSmallBufferCount = 640 LargeBufferSize = 819200 MaxFastTransmit = 64000 MediumBufferSize = 150400 PriorityBoost = 0 SmallBufferSize = 12800 TransmitWorker = 32 FastSendDatagramThreshold = 4096 EnableFastRouteLookup = 1 EnablePMTUDiscovery = 1 IgnorePushBitsOnReceive = 0 GlobalMaxTcpWindowSize = 128480 MaxFreeTcbs = 8000 MaxHashTableSize = 16384 MaxNormLookupMemory = 5000000 SackOpts = 1 SynAttackProtect = 1 Tcp1323Opts = 1 TcpLogLevel = 1 TcpMaxDupAcks = 3 TcpMaxHalfOpen = 100 TcpMaxHalfRetried = 80 TcpRecvSegmentSize = 1460 TcpSendSegmentSize = 1460 TcpTimedWaitDelay = 30 TcpUseRFC1122UrgentPointer = 0 TcpWindowSize = 128480 MaxConnectionsPer1_0Server = 20 MaxConnectionsPerServer = 10 DefaultTTL = 64 DisableUserTOSSetting = 0 TcpMaxDataRetransmissions = 6 DefaultTOSValue = 240 Thanks Quote Link to comment Share on other sites More sharing options...
JoeBro47213 Posted October 12, 2007 CID Share Posted October 12, 2007 i have ool, got cablevision to run a direct line off the pole last week and now without boost get 13-24mbps 24 being peak, so call and anoy them on the daily basis til they offer a free service call and get a drirect line Quote Link to comment Share on other sites More sharing options...
haifa7 Posted February 17, 2011 CID Share Posted February 17, 2011 (edited) Follow the following steps to increase the speed 1. Go to Start-> Run-> and type gpedit.msc 2. Expand the Administrative Templates branch 3. Expand the Network tab 4. Highlight QoS Packet Scheduler 5. Click on Limit Reservable Bandwidth and check the enabled box 6. Then Change the Bandwidth limit % to 0 % After that check the speed <snip> HERE Edited February 17, 2011 by mudmanc4 Thanks for not linking spam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.