Jump to content

Wireless internet


mattwl

Recommended Posts

I am a new user here and would like some help please. I have wireless internet through omnicity. I am supposed to have 768 kbps down and 256 kbps up. I cant figure out why I cant reach any speeds even close. here are my test results.

:::.. Download Stats ..:::

Connection is:: 492 Kbps about 0.5 Mbps (tested with 579 kB)

Download Speed is:: 60 kB/s

Tested From:: http://www.testmy.net/

Test Time:: Fri Mar 18 23:17:31 EST 2005

Bottom Line:: 9X faster than 56K 1MB download in 17.07 sec

Diagnosis: May need help : running at only 46.59 % of your hosts average (117.203)

Validation Link:: https://testmy.net/stats/id-MID1N35WF

Plus my speedguide results.

TCP options string = 020405b401010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 17520

RWIN Scaling (RFC1323) = 0 bits

Unscaled Receive Window = 17520

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2)

64240 (MSS x 44) 

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms

Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms

Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 119 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000

Please help me. I have

AMD 3000+

512 MB RAM

80GIG HARDDRIVE

AND I CONNECT WITH ETHERNET. BUT I AM USING A NAVINI WIRELESS MODEM.

ETHERNET CARD SAYS 10 MBPS.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...