Jump to content

Got 2 nic card in comp and need help!!!!


XblL RuLeZ

Recommended Posts

ya i got 2 nic caeds in my computer and one internet connectiom, so i want to turn my computer into a router and use it to monitor exact bandwith that is being used at a time

are there any programs i need or do i need to get a certain firewall?

any help would be great

o btw here are my scores

:::.. Download Stats ..:::

Connection is:: 537 Kbps about 0.5 Mbps (tested with 748 kB)

Download Speed is:: 66 kB/s

Tested From:: http://www.testmy.net/

Test Time:: Fri Apr 15 2005 13:40:01 GMT-0400 (Eastern Daylight Time)

Bottom Line:: 10X faster than 56K 1MB download in 15.52 sec

Diagnosis: May need help : running at only 16.1 % of your hosts average (comcast.net)

Validation Link:: https://testmy.net/stats/id-9RNFT7WUQ

download is pretty bad right now but is usually around  785 kb/sec o well hers the ul speed

:::.. Upload Stats ..:::

Connection is:: 684 Kbps about 0.7 Mbps (tested with 579 kB)

Upload Speed is:: 83 kB/s

Tested From:: http://www.testmy.net/

Test Time:: Fri Apr 15 2005 13:40:40 GMT-0400 (Eastern Daylight Time)

Bottom Line:: 12X faster than 56K 1MB upload in 12.34 sec

Diagnosis: Awesome! 20% + : 107.27 % faster than the average for host (comcast.net)

Validation Link:: https://testmy.net/stats/id-A83PHSZ5G

great site !

Link to comment
Share on other sites

Speeds look pretty formidable... Are you on cable?  What level service?

As far as being a router, if you are using WinXP as the host system, simply goto the lan connection properties for the internet connection and turn on ICS (Internet Connection Sharing).  This will do NAT translation for the other computers in the network.  I personally suggest a cable router, since they tend to be more "Set and Forget" then the ICS.  You should be able to pick up a Linksys or Dlink for around 50-70 bucks that does a great job (although at high speeds >1.5Mbit, the NAT is noticeably slower then not NATting) for the price, and the linksys ones have some firewall and virus protection.  You can get fancy with them for a little more money and get like a linksys router setup for Vonage and do all your network IP translations as well as drop an analog phone port out connected to the Vonage network.

Link to comment
Share on other sites

... Have been doing that for some time, but yes it can get tricky unless ya got xp on all machines. My question is can you put a router on the seconday Nic??  hmmm :?:Am running a web server and my isp is not real keen on that kinda thing if you have a lot of traffic  :D

Link to comment
Share on other sites

Peice of cake if you are running XP you already have 2 nics just go into your network connections and bridge the connection ok now you have a in coming connection for your internet and a out going connection to serve internet to another machine if you want to run 3,4.5...ect machines off it add a router to the out bound nic card as for controlling each machine as to how much of your incoming pipe you want them to have visit http://www.bandwidthcontroller.com/ for a real nice peice of software that will allow you to set speeds by a number of rules TCP UDP...ect.

You will have to hard set your IP, Subnet, & Gateway on the machines you want to control but it works great I run a wireless ISP

and compared to the $2000 bandwidth controller sys. you can buy there software for $50. plus you can try it for free for 30 days any question I might be able to help you with I would be glad to just email me at knightshade37@hotmail.com just put something like (question about bandwidth controller in the subject line so I dont delete by mistake good luck and I hope this helps you out

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...