igarek77 Posted July 21, 2005 CID Share Posted July 21, 2005 Hi All ! I was just wandering about my speed that I get from comcast. I'm currently on their 4Mbps plan and when I run the test from this site here are the results. :::.. Download Stats ..::: Connection is:: 1264 Kbps about 1.3 Mbps (tested with 2992 kB) Download Speed is:: 154 kB/s Tested From:: https://testmy.net/ (server2) Test Time:: Wed Jul 20 19:28:34 PDT 2005 Bottom Line:: 23X faster than 56K 1MB download in 6.65 sec Diagnosis: May need help : running at only 34.75 % of your hosts average (comcast.net) Validation Link:: https://testmy.net/stats/id-9SOXA53LR I also installed the cablenut software and applied the Cable settings. and the above results are the same. Any help would be appreciated. P.S. direct connection no routers involved. Thanks, Z Link to comment Share on other sites More sharing options...
php Posted July 21, 2005 CID Share Posted July 21, 2005 Welcome to the forum igarek77 Read here ~php Link to comment Share on other sites More sharing options...
igarek77 Posted July 21, 2005 Author CID Share Posted July 21, 2005 OK I went to the link and here are my replies. 1. I am running WinXP Home Edition With SP2 and with the P2P fix. 2. Comcast HSI 4/378 3. http://ttester.broadbandreports.com/tweak/block:39b6f3c?service=cable&speed=&os=winXP&via=normal 4.-- testmy.net: :::.. Download Stats ..::: Connection is:: 991 Kbps about 1 Mbps (tested with 2992 kB) Download Speed is:: 121 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Wed Jul 20 22:08:45 PDT 2005 Bottom Line:: 18X faster than 56K 1MB download in 8.46 sec Diagnosis: May need help : running at only 27.25 % of your hosts average (comcast.net) Validation Link:: https://testmy.net/stats/id-CGO51WBYI --http://nitro.ucsc.edu/ : TCP/Web100 Network Diagnostic Tool v5.3.3d click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 403.77Kb/s running 10s inbound test (server to client) . . . . . . 2.55Mb/s Your PC is connected to a Cable/DSL modem Information: Other network traffic is congesting the link 5. Done 6. Done 7. Done 8. Done 9. Regularly done every 3 days. 10. Do not have Zone Alarm. (McAfee firewall) 11. No need for both. 12. Scan is complete, PC is clean. 13. All the latest updates are installed. 14. Done, nothing found. 15. Done. 16. Do not know how to do that. Thanks, I hope this info helps. Link to comment Share on other sites More sharing options...
php Posted July 21, 2005 CID Share Posted July 21, 2005 What cablenut file did you use? Try this one... Link to comment Share on other sites More sharing options...
igarek77 Posted July 21, 2005 Author CID Share Posted July 21, 2005 Do you think it would matter if I have a cable connection ??? and try to do the DSL .css file ? Link to comment Share on other sites More sharing options...
Orignal_Cronicus Posted July 23, 2005 CID Share Posted July 23, 2005 rofl why would u use a dsl.css on a cable conection, if u have done all the suggestions the pros here said 2 and stil se no results and ur on a 4 mb line u might wnaan go into control pannel/networkconections/local area conection/status/propteries/configure/advanced and make shure ur media type is set to 100 base TX full_duplex if it is i would inspect sum more, find out the age of ur net card and proly eventualy call comcast! Link to comment Share on other sites More sharing options...
igarek77 Posted July 27, 2005 Author CID Share Posted July 27, 2005 Hi, Thanks for the suggestion, but I went to the properties like you told me and I do not have the media type menu. all i have is this: Early Tx Threshold is set to 4 Link Down Power Saving - Disabled Link Speed/Duplex Mode - 100 Full Mode Network Address - Not Present Receive Buffer Size - 64K bytes WakeUp on ARP/PING - Enable WakeUp on Link Change - Disable WakeUp using APM Mode - Disable So any more suggestions ??? Tried calling comcast and it's pointless, they say in their disclosures they do not gurantee the speed, but can only try to provide the service and I don't want to talk to them anymore, seems like they are all following the same stupid script. (No offence to anyone working there) Any more suggestions ? [glow=red,2,300]Igor.[/glow] Link to comment Share on other sites More sharing options...
Recommended Posts