cdhotfire Posted August 5, 2005 CID Share Posted August 5, 2005 well, i go to the site 192.168.1.1, and foward my ports, but when i check to see if their open, they are not. any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
FallowEarth Posted August 5, 2005 CID Share Posted August 5, 2005 There seem to be many different versions of that router, from the Linksys support site: BEFSR41 V1.0 BEFSR41 V3.0 BEFSR41 V4.0 BEFSR41-CA(FR) V1.0 BEFSR41-CA(FR) V3.0 BEFSR41W V1.0 BEFSR41W-CA(ENG) V1.0 BEFSR41W-CA(FR) V1.0 Do you know which version you have? Quote Link to comment Share on other sites More sharing options...
cdhotfire Posted August 5, 2005 Author CID Share Posted August 5, 2005 There seem to be many different versions of that router, from the Linksys support site: BEFSR41 V1.0 BEFSR41 V3.0 BEFSR41 V4.0 BEFSR41-CA(FR) V1.0 BEFSR41-CA(FR) V3.0 BEFSR41W V1.0 BEFSR41W-CA(ENG) V1.0 BEFSR41W-CA(FR) V1.0 Do you know which version you have? doesnt say, its either v1 3 or 4. the first 3 you have said. dont think theres alot of diff between them. Quote Link to comment Share on other sites More sharing options...
FallowEarth Posted August 5, 2005 CID Share Posted August 5, 2005 Maybe not...but HERE's the downloads for V4.0, firmware and user guide. Quote Link to comment Share on other sites More sharing options...
cdhotfire Posted August 5, 2005 Author CID Share Posted August 5, 2005 well, my problem is still not solved. ports still dont open, ive even put dmz hosting and had no result there. please help. Quote Link to comment Share on other sites More sharing options...
humorman Posted August 5, 2005 CID Share Posted August 5, 2005 I have been having about same problem. I have been trying to get it working for over a year on and off so I just took the router out of the way. I try to run a server throught it and can't. I have tried port forwarding etc. I hope man you get yours solved I have same problem. But I use a dlink 514 router. Quote Link to comment Share on other sites More sharing options...
cdhotfire Posted August 5, 2005 Author CID Share Posted August 5, 2005 im thinking, maybe isp is blocking ports. edit: and im trying to run a server also. Quote Link to comment Share on other sites More sharing options...
FallowEarth Posted August 5, 2005 CID Share Posted August 5, 2005 I'd check out the parts about port range filtering, port range forwarding, port triggering, UPnP forwarding, make sure you're using DMZ to Linksys's specs, and maybe try the admin factory defaults. Quote Link to comment Share on other sites More sharing options...
KingCobra Posted August 5, 2005 CID Share Posted August 5, 2005 What ports are you trying to forward? The ISPs usually only block 21 and 80. Does the server have a static ip and is that ip the one you are using? Quote Link to comment Share on other sites More sharing options...
cdhotfire Posted August 5, 2005 Author CID Share Posted August 5, 2005 yes, i am using the right ip, by the way its a ftp server im trying to put up. it was originally port 21, i changed it to 27015 then fowarded the ports, check if they were open and it said they were closed. Quote Link to comment Share on other sites More sharing options...
humorman Posted August 5, 2005 CID Share Posted August 5, 2005 I finally got mine worked out. I can't believe how smart I am that I didn't figure it out before. See I would set it and then the router would stop working and I tryed accessing it and nothing. So finally I went ever time to the reset button were it resets to defualt settings and I pressed it then it would work but the ports I had opened or forwarded would not work because it was back at defualt settings. And I did this everytime same thing. Then I thought well maybe I can reset it by unplugging power for like 30 0r 60 secounds and I did that and then plug it back in and then waited it came back on and then the settings were there and it all worked yes. So maybe that could be your problem after you change your settings what do you do? And if you set it to a ip what ip? Maybe it is not the right ip because for apache you shoould set it to router ip. And for your router you should set DMZ to something like 192.168.0.100 or something. I hope that helps I finally got mine worked out. LoL I am dumb but smart also lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.