Jump to content
Sign in to follow this  
speedcrazed

Best speed ever :D

Recommended Posts

quote from http://dslnuts.com/tips_tricks.shtml

"HOW TO SET THE PROPER NIC DUPLEX SETTINGS:

Win98/ME: to change to half-duplex:

* Open Control Panel.

* Double-click Network.

* From the scrollable list, select your Ethernet adapter (rather than any dial-up) with a green icon.

* Click the button Properties.

* Click the tab Advanced to bring it to the front:

* In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.

* In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (B) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.

* Click OK to exit the Adapter settings.

* Click OK all the way out - you might need to restart.

Windows 2000 or XP: to change to half-duplex:

* Open Control Panel.

* Double-click Network and Dial-up Connections.

* Identify the icon for your cable modem connection: usually Local Area Connection.

* Right-click that icon and select Properties.

* Under the ethernet adapter icon, click the button Configure.

* Click the tab Advanced to bring it to the front:

* In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.

* In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (B) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.

* Click OK to exit the Adapter settings.

* Click OK to exit the Connection properties. "

VanBuren :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...