d1nonly Posted October 22, 2005 CID Share Posted October 22, 2005 After reading Van Buren's sticky on 'Before Posting Problems read this'...here it is. Quote Link to comment Share on other sites More sharing options...
cholla Posted October 22, 2005 CID Share Posted October 22, 2005 Welcome to the forum d1nonly I'm not the best on faster connections but I can probably get you started.First you dont have to post the results but the site below is better for the NDT test .The nitro one always shows packet loss.etc.It didn't use to have that problem. http://speedtest.umflint.edu/ The Cablenut shows the 2000 on its XP manual tweak screen this is normal.I would try a larger rwin.You have to enable window scaling for a rwin above 65535 that is what Tcp1323Opts Quote Link to comment Share on other sites More sharing options...
d1nonly Posted October 22, 2005 Author CID Share Posted October 22, 2005 Cholla, thanks a lot for taking the time Ok, something is working here. My upload got about 15-20 percent faster (it still varies) and my download is now at 90+ percent. Still trying to figure out how to get the screenshot of my cablenut settings in my post. Most of the areas are blank...(except for the ones you told me to fill in and a few others) Will now try it with the other settings you provided. :::.. Upload Stats ..::: Connection is:: 275 Kbps about 0.3 Mbps (tested with 579 kB) Upload Speed is:: 34 kB/s Tested From:: https://testmy.net/ (server2) Test Time:: Sat Oct 22 12:47:58 EDT 2005 Bottom Line:: 5X faster than 56K 1MB upload in 30.12 sec Diagnosis: May need help : running at only 52.78 % of your hosts average (cox.net) Validation Link:: https://testmy.net/stats/id-B35Y2E1MC :::.. Download Stats ..::: Connection is:: 3364 Kbps about 3.4 Mbps (tested with 12160 kB) Download Speed is:: 411 kB/s Tested From:: https://testmy.net/ (server2) Test Time:: Sat Oct 22 12:54:13 EDT 2005 Bottom Line:: 60X faster than 56K 1MB download in 2.49 sec Diagnosis: 90% + Okay : running at 91.79 % of your hosts average (cox.net) Validation Link:: https://testmy.net/stats/id-8J2YXLUMS I also ran the test you recommended: http://speedtest.umflint.edu/ but am not sure if you need me to post the results, but here are the basics Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Half Duplex mode No network congestion discovered. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 125.27 msec; the Packet size = 1460 Bytes; and No packet loss was observed. This connection is receiver limited 93.73% of the time. Increasing the current receive buffer (62.0 KB) will improve performance This connection is network limited 6.23% of the time. Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: OFF Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Information: Network Address Translation (NAT) box is modifying the Client's IP address Server says [68.10.226.118] but Client says [192.168.0.101] D1nonly Quote Link to comment Share on other sites More sharing options...
cholla Posted October 23, 2005 CID Share Posted October 23, 2005 d1nonly; The NDT test still shows your window scaling off.Did you try these settings first? DefaultReceiveWindow 126976 Quote Link to comment Share on other sites More sharing options...
kru-soldier Posted October 23, 2005 CID Share Posted October 23, 2005 d1 the same as from BHD if so hit me up in game if not sry:) Quote Link to comment Share on other sites More sharing options...
d1nonly Posted October 23, 2005 Author CID Share Posted October 23, 2005 Cholla, again thanks....now about the screen shot: Quote Link to comment Share on other sites More sharing options...
cholla Posted October 23, 2005 CID Share Posted October 23, 2005 Here are the basics on doing a screen shot . 1. Bring up the window you want a screen shot of( In this case Cablenut manual tweak screen) 2. press the Print Screen/Sys Rq. key if this is not exactly the key on your keyboard it should be simular. 3.Select paint ( Should be here StartProgramsAccessoriesPaint) 4.Once the Paint window is up L.click in the white window screen,Go to the edit drop down & select paste.This should have the screen shot in the paint window. 5.In the file drop down select save as ; in the save as window select save inMY Pictures Save as type: .jpg or .jpeg is what I use if your OS only has .bmp as a choice then save as .bmp With a .bmp you will have to convert it to .jpg to post it.Hopefully your OS will not need to do this. Mine does I have a freeware program called Ifranveiw that I use. 6. Then when you post just select Additional Options & Browse to the screen shot in My Pictures & click it. it should show in the Browse window .(just the text about the screen shot) then when you save the post it will have the screen shot in it. If you need Ifran veiw it is easy to find on the web to DL & pretty east to use .I will give you some instruction on it if you have to use it . Quote Link to comment Share on other sites More sharing options...
jkandra Posted October 23, 2005 CID Share Posted October 23, 2005 How do you make a screen shot of your Desk Top? Probably should of posted it in off topic. Quote Link to comment Share on other sites More sharing options...
cholla Posted October 23, 2005 CID Share Posted October 23, 2005 jkandra ; The same way you just have only your desktop showing (no windows) hide any task or tool bars you don't want in the shot. Quote Link to comment Share on other sites More sharing options...
kru-soldier Posted October 24, 2005 CID Share Posted October 24, 2005 I was just wondering if you played a Nova game called BHD.? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.