BAF

hmm. Rebooted the mdoem for the new speeds. Dunno what the caps are now, but I was just downloading at 900 KB/sec. NDT test only shows 6mbit, but it screams for me to increase the rwin to 98kbytes. Damn... i just tweaked too Not that i'm complaining. I'd rather have speed upgrades + retweak every day Also, uploaded at 90 KB/sec to a bud just now.

heh ok. Thanks

yes, but the site explains HOW to carry out the glitches. They are just where you go a certain place in a map and you can get under it or something and be invincible.

couldn't they only sue me if i refused to take it down upon request?

I am planning on making a website to list glitches in maps in unreal tournament. I registered the domain utglitches.net. Someone said epic might sue me... dunno if they were joking or not. As long as i state i'm not in anyway affiliated with epic and that all trademarks are theirs, would they sue me?

happens to me sometimes. It is probably just because your connection "warms up" so it lets you get higher through put.

the background? Anyway, nice speeds you have. What are both of your caps? (Mine are 4mb/512kb)

alright, i'll try that. I think i already treid it, it didnt really help.. http://www.dslreports.com/forum/remark,12738085~mode=flat <-- more info if anybody wants to help

yeah i did that. What BDP/send wins should i use? I'm pretty sure those retransmissions are all upload, tweaktest on dslreports says there are no retransmissions on thier download tweaker. Any like that that test uploading ?

stats on NDT say: WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 405.06Kb/s running 10s inbound test (server to client) . . . . . . 4.53Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_05 ------ Web100 Detailed Analysis ------ 10 Mbps Ethernet link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 80.92 msec; the Packet size = 1460 Bytes; and There were 17 packets retransmitted, 299 duplicate acks received, and 137 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.9% of the time. Contact your local network administrator to report a network problem Contact your local network admin and report excessive packet reordering Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Information: Network Address Translation (NAT) box is modifying the Client's IP address Server says [69.169.215.100] but Client says [192.168.0.100]

i mean on my linux router. It had 100kb by default. Do you have any other ideas?

putting 8192 as the send window (instead of the 100kb it had) seemd to help stable it a littlebit. What other values are good? (its empty on this pc at the moment)

tried it and it doesnt work either

I randomly tried 384000 for my upload... running 10s outbound test (client to server) . . . . . 678.38Kb/s running 10s inbound test (server to client) . . . . . . 4.38Mb/s The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet Information: Other network traffic is congesting the link :D

Still working on getting the upload to lock on. It jump up and down, one sec at 70 KB/sec, then 40, then 50, then 30, it jumps all around.

I am running the sp1 tweaks on sp1 at the moment. It goes up and down during an NDT test. I get like 750 KB/sec on a download test here now that it is offpeak (it starts at 300 and then goes faster). See how the upload goes up and down? No matter what i put for the sendwin values, it still does it... any ideas? Download is satisfying enough -

version 5 folder of what? I don't know where to get your tweaks, I just used the the file you uploaded for me.

Also, I noticed my download locks on on speedtests, but for exapmle, moves around a lot getting from microsoft.com. Prolly their servers, but i didnt know if ther ewould be a different tweak for it.

so I am going to try at 16384 and go up by 8kb each time? Where is your SP2 mod by the way?

Also, I am going to install SP2 here in a minute to see if it makes my pc work slowly like it did before... are these tweaks going to work on sp2?

Tweaked using the config file you said. http://ttester.broadbandreports.com/tweak/block:50410b9?service=cable&speed=4000&os=winXP&via=normal <-- there is a tweak test. The download locks right on at 4.5-4.6mbits now instead of fluctuating. The upload goes up and down a lot more than it did. IE, 70 KB/sec, 60 KB/sec 30 KB/sec, etc.... Anyway to stabilize that? Reran it -- http://ttester.broadbandreports.com/tweak/block:255248a?service=cable&speed=4000&os=winXP&via=normal Speed test: Checking for Middleboxes . . . . . . . . . . . . . . . . . .

I have a sb5100 on adelphia. They exchanged the terayons for it. At least in my area, they are moving away from terayon after they decided not to support the CMTS anymore. They even bought a new motorola cmts

even if you uncap for an hour they still have logs of your modem disconencting thenc oming back on the network without ever talking to their tftp server. I am on adelphia and i have a 4mb down 512kb up cap. (I am on the premiere plan, only cost $2 more per month for us)

It isn't even final. Adelphia, I hope, stays together through this. I have been bring up the adelphia average (I have premiere, why pay $57.95 for 3mb/256kb when for $59.95 we can get 4mb/512kb ) Your connection is: 4128 Kbps (about 4.1 Mbps) You downloaded at: 504 KB/s Your TRuSPEED: ^info^ 4417 Kbps :: 539 KB/s (7% overhead factored) Bottom Line: You are running: 74 times faster than 56K and can download 1 megabyte in 2.03 second(s) Diagnosis: Awesome! 20% + : 66.38 % faster than the average for host (adelphia.net) our connection is: 431 Kbps (about 0.4 Mbps) You uploaded at: 53 KB/s Your TRuSPEED: ^info^ 461 Kbps :: 57 KB/s (7% overhead factored) Bottom Line: You are running: 8 times faster than 56K and can upload 1 megabyte in 19.32 second(s) Diagnosis: Awesome! 20% + : 46.6 % faster than the average for host (adelphia.net) Upload is crappy, i usually average around 450ish.... Check my stats: https://testmy.net/30-BAF Upload is crappy, but oh well. Its better than the 200 i got on the normal package http://www.dslreports.com/speedtests/4150102;445964;e0dfaf7b97c976b538cee686fd71028d;2.0;nyc.speakeasy.net/1108822437 is about the lowest I get on those speed tests NDT gives me: running 10s outbound test (client to server) . . . . . 499.13Kb/s running 10s inbound test (server to client) . . . . . . 4.31Mb/s The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet [edit] Also, Adelphia is doing speed upgrades. 34 areas are testing these. By the end of the month or so should be the final date for them

heh. I've gotten 25% above my cap. I always pull 4.5mb-5mb depending on where I test, and our cap is 4000