EngrJayze

i agree.. i'm satisfied in my connection [ so far ] .. my only grudge is that it's sometimes unresponsive.. when i click a link-nothing happens,click again-back to normal.. i'm not disconnected but sometimes the lan icon does not 'light' up - meaning no network at random times.. it's quite annoying.. wahaha.. pawn other neighbors and change their colorcodes.. it's AP invasion... make another thread quick and i'll vote for it to be stickied :smitten: wtf: sorry for the double post..clicked qoute instead of modify.. my bad

i agree.. i'm satisfied in my connection [ so far ] .. my only grudge is that it's sometimes unresponsive.. when i click a link-nothing happens,click again-back to normal.. i'm not disconnected but sometimes the lan icon does not 'light' up - meaning no network at random times.. it's quite annoying..

hehehe... i don't even know how to access their pc's..any remote way to accomplish the task?? :evil: those installer [at first sight, bet-collectors] can't be trusted nowadays.. :2funny:

wahaha.. did you really managed to ask the installer to place the 2 others on other colorcode?..can you teach me how to change colorcode, will try it on my neighbors.. :knuppel2: btw visit google's latest april fool joke: Project Virgle

hope i have that kind of rssi level..and you are the only one using smartbro in your area..how lucky mine is 800+ and 10 users, i guess it's sufficient... look at my index 1, there are 24 users..

i guess my antenna is 20 ft high..here are the ap's available here..can you give me the meaning of those cryptic jargon of words??: Current entry index: 2 ********************************************* Index: 0 Frequency: 5735.00 MHz ESN: Jitter: 2 RSSI: 526 Power Level: -80 Beacon Count: 6 BRcvW: 1 DFSEn: 0 FECEn: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 1712 SectorID: 1 Color Code: 31 BeaconVersion: 1 SectorUserCount: 3 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3 ********************************************* Index: 1 Frequency: 5735.00 MHz ESN: Jitter: 8 RSSI: 311 Power Level: -85 Beacon Count: 2 BRcvW: 1 DFSEn: 0 FECEn: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 0 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 1584 SectorID: 1 Color Code: 43 BeaconVersion: 1 SectorUserCount: 24 NumULHalfSlots: 18 NumDLHalfSlots: 54 NumULContSlots: 3 ********************************************* Index: 2 Frequency: 5775.00 MHz ESN: Jitter: 1 RSSI: 849 Power Level: -70 Beacon Count: 7 BRcvW: 1 DFSEn: 0 FECEn: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 3381 feet TxBER: 1 EBcast: 1 Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 131 SectorID: 2 Color Code: 32 BeaconVersion: 1 SectorUserCount: 10 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3 ********************************************* Index: 3 Frequency: 5815.00 MHz ESN: Jitter: 8 RSSI: 346 Power Level: -84 Beacon Count: 5 BRcvW: 1 DFSEn: 0 FECEn: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 1855 SectorID: 3 Color Code: 33 BeaconVersion: 1 SectorUserCount: 1 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3 i wonder what's your distance from the ap CB? ..heres mine, is it good enough?: RSSI : 761 Power Level : -74 dBm Jitter : 2 Air Delay : 69 approximately 0.64 miles (3381 feet)

aic..but i'll leave the job to the master tweakers on this site..i'll just wait for the results :haha: :haha:

i'm sure i don't have a corrupted .pkg2 file..from the threadstarter's post i can see that under STATE it have REFRESHED, meanwhile mine says SNMP HAS NO RESPONSE.. btw how on earth do you have a 7mbps aggregate?..i use 500kbps for download and upload..could i change download to 800 while upload to 200kbps bec. i don't do a lot of uploading anyways... and can you share any other canopy configs?... thanks CB

i followed exactly what the instructions told me to but i got this error,and i cancelled the update process because it took so long to transfer boot.image to the sm.my canopy software was never updated,but still it's working properly despite the failed update process.can you help me how to update it properly? btw my gateway ip adress on canopy is 169.254.0.0, and i changed it to 169.254.3.3..nothing happened..may i ask what's the difference? and lastly can i change Sustained Uplink Data Rate : from 500 kbps to max 1000kbps? thanks for helping. p.s. : sorry for the large images..i can edit if it annoys you

i still have SMBRO under the Packagename Column..how sad..they hadn't upgraded after all....

how will i know if i'm on WR512? lately we had a 48 hours of downtime here in our area..is it because of an upgrade or a maintenance? and how do they practice maintenance, coz they took almost two days

:smitten:

ahm system is an all around software used to tweak,config,and maintain your system..it has security features too..for more info visit http://http://www.iolo.com/sm/7/pro/ i can access my canopy through http://169.254.1.1..there is a blue box on the left and on the bottom of it are the words: Account: none Level: ADMINISTRATOR ..am i already on the admin account page? i'm new here but i would like to suggest you to follow the QoS Packet Scheduler Tweak because it's the only one i tried and tested to speedup your connection..after following it i see a boost in streaming sites like youtube wherein buffering data is very necessary.. hope i helped you.. and by the way,,to the other members - keep it up! this is the most useful forum i have been w/c regards to making smartbro a tolerable,perhaps amazing broadband..

@becman - its fast since i tested on the morning..i'll test on peak hours later thanks for welcoming me to this forum

i'm just new here in this forum..my location is in Binmaley, Pangasinan