Jump to content

hottestarcher

Members
  • Posts

    62
  • Joined

  • Last visited

    Never
  • Speed Test

    My Results

Posts posted by hottestarcher

  1. The problem isn't with your ISP - it's with a service on your computer.

    To fix it,

    1. Click Start >> Run >> and type "services.msc" and click OK.

    This will take you to the list of Services hidden in the Administrative Tools.

    2. In the list of services, click "DNS Client".

    3. Make sure that the Status column displays Started and that the Startup Type column displays Automatic.

    4. If the service is not set to Started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:a.  Right-click DNS Client, and then click Properties.

    b.  In the DNS Client Properties dialog box, click the General tab, and then click Automatic in the Startup type list.

    c.  Click Start, click Apply, and then click OK.

    Basically the issue here is just that your DNS client isn't even running, therefore you can't flush it! :o)

    thanks. i'll try it and see if it works :)

  2. Get to network settings from control panel, when you get there , youll see whatever connectionr u have, right click in the field, your options wil be 2 create a new one as well as bridge conections. You can bridge by highligting two or more of the shown connections. Are u sure your existing device is good? I would go grab a cheap ethernet card if your not able to try ceating the new connection.  Just play around a bit, familairize yourself w/ as much as u can.

    I bought my card last year. I really think has something to do with my ISP (SmartBro) :angry:

  3. I had this happen once, i went into network settings, and created a new connection, it seems to me i either had to bridge the two, or i had a bad network device. Try this, post up your results.

    I don't understand how to do that. I tried creating a new connection but I cannot successfully create one. What are the options that I have to choose?

  4. Just recently, I received an sms from SmartBro saying that the basestation in our area (Meycauayan) will undergo maintenance. I wasn't able to surf the 'Net until around 10 pm. I then noticed that I keep getting disconnected from the Internet and I'm now unable to download files from uTorrent. I then tried to do use the basic repair function of my connection but I keep getting this error message: "Windows could not finish repairing the problem because the following action cannot be completed: Clearing the DNS cache. For assistance, contact the person who manages your network". I also tried to disable and reenable my connection but I'm still encountering the same problem. I even tried to do it in the command prompt. ipconfig /release and /renew works fine but whenever I try to flush the dns (ipconfig /flushdns), I keep getting this error: "Could not flush the DNS Resolver Cache: Function failed during execution.". I don't have time to call SmartBro so I sent them an email instead. I still haven't received any response from them. I hope I provided all the information that you need to help me with my problem. Thanks in advance.

  5. I cannot use any of the proxies. Whenever I go to Internet Options in IE7 it shows under LAN settings that the box "use automatic configuration script" is checked with these values: http://localhost:9100/proxy.pac. I tried unchecking it and checked the box next to the proxy section and restarted IE but it still came up checked when I went back to see the settings again. Is anyone encountering the same issue? Is Smartbro preventing users to use proxies now?

  6. 2-3 days. they also call me up at least thrice.  :smiley:

    They sent me a reply today and gave me a service request number and told me that someone will call me. How long do they usually call after they send you an email? Should I call them using the reference number that they gave me or should I wait?

  7. that must have helped for a clearer line of sight for your antenna to the base station. email smartbro and encourage them to upgrade to WR512 to suffice the already congested access points in your base station.

    can't I just call them and request for it? Does it really have to be an email? What's their email address?

  8. your connection to color code 152 is the answer why you have slow speed. the RSSI is not that high but you are sharing it with 86 users  :shock: that solves the mystery.

    i already askedthem to go to our place but all they did was add more height to my antenna. They did not do a rehoming because according to them, the other basestation is already congested. What should I do now? :(

  9. i think the charge was for the pole. they extended that hoping to compensate for your far distance from the base station, and a better line of sight between your antenna and the access point.

    did they not change anything in your canopy configuration? please post your AP Eval page now so we can see the difference after the pole extension.

    :smiley:

    *********************************************

    Index: 0 Frequency: 5755.0 MHz ESN: 0a-00-3e-f2-1a-26

    Jitter: 5 RSSI: 341 Power Level: -82 Beacon Count: 7 BRcvW: 1 DFS: 0 FEC: 0

    Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

    Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

    FrameNumber: 49 SectorID: 1 Color Code: 139 BeaconVersion: 1 SectorUserCount: 152

    Frequency: 5755 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

    *********************************************

    Index: 1 Frequency: 5755.0 MHz ESN: 0a-00-3e-f2-8b-44

    Jitter: 6 RSSI: 340 Power Level: -82 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

    Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

    Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

    FrameNumber: 332 SectorID: 1 Color Code: 151 BeaconVersion: 1 SectorUserCount: 43

    Frequency: 5755 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

    *********************************************

    Index: 2 Frequency: 5795.0 MHz ESN: 0a-00-3e-f2-8b-b7

    Jitter: 2 RSSI: 619 Power Level: -76 Beacon Count: 6 BRcvW: 1 DFS: 0 FEC: 0

    Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 2 Range: 5194 feet TxBER: 1 EBcast: 1

    Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

    FrameNumber: 645 SectorID: 2 Color Code: 152 BeaconVersion: 1 SectorUserCount: 86

    Frequency: 5795 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

    *********************************************

    Index: 3 Frequency: 5835.0 MHz ESN: 0a-00-3e-f2-8b-85

    Jitter: 5 RSSI: 305 Power Level: -83 Beacon Count: 10 BRcvW: 1 DFS: 0 FEC: 0

    Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

    Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

    FrameNumber: 864 SectorID: 3 Color Code: 153 BeaconVersion: 1 SectorUserCount: 30

    Frequency: 5835 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

  10. none i think so. its smartbro who will pay their contractors to do that for you.

    @ FB, where have you been? hottestarcher is almost 6,000 feet far from his base station so he wanted a re homing. as posted he is scheduled a field visit today.

    They charged me 450 because according to them they need to add height to my connection. So they added another "tubo" but still my connection is slow. It's as if nothing happened. They didn't change the basestation where I was getting my signal from. :(

    at 5:24 p.m

    share2-18JEQGHOM

×
×
  • Create New...