martylemoo Posted December 30, 2004 CID Share Posted December 30, 2004 Hi Guys, In an attempt to upgrade my system to 54g i have changed my router from a linksys 11b to the d-link di-624 extreme g rev c with latest firmware. I use a wireless broadband service and connect via a wet 11 bridge. My problem:- The router seems fine, all lights do as they should it hands out ip addresses fine and all pcs on the network can see each other but i can not seem to get any internet activity. It will not ping anything not even the wet 11. I sent the d-link back and it was returned as they said there was no fault. Any ideas on what i could try to get this working. If i put the old linksys back with exactly the same settings it works perfectly thanks Martyn Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted December 30, 2004 CID Share Posted December 30, 2004 Hey Marty and welcome to the forums, my first thought was you might want to reset your modem (bridge), I dont know if this is a problem with the bridge but I had some similar problems when I changed to G but I use cable modem. I am sure someone here will be able to help you fix it, we have alot of smart people here. :D Quote Link to comment Share on other sites More sharing options...
bigw Posted January 1, 2005 CID Share Posted January 1, 2005 i have a slightly diferant d-link but i had the same problems, i had to restart the computer after gettng it all set up and then restart again and power off the modem and d-link to get it to work. good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.