Makkoness Posted December 24, 2008 CID Share Posted December 24, 2008 The other day I tweaked my canopy and I don't know what happened but suddenly I can't connect to the internet anymore, so I tweaked I little more and accidentally enabled DHCP . So I got no choice but to call customer assistance and they told me they will send someone here today, They just left earlier, It's a good thing they didn't noticed that I tweaked my canopy lol. So, Now I got a new antenna but when I access the canopy some of the values are different than my previous one. Quote Link to comment Share on other sites More sharing options...
Makkoness Posted December 24, 2008 Author CID Share Posted December 24, 2008 Can I still improve my speed? Even if my "Sustained Uplink/Downlink Data Rate" are 3500, The speed is still the same, around 290-350, If I can double it I would be very happy! Also can I still use coolbuster's 20 steps to improve my speed? I posted a topic regarding that the other day, Is "scale factor of 8" this (511104 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3))? Any help would be very much appreciated. Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted December 24, 2008 CID Share Posted December 24, 2008 If I had used the service I would be able to assist you, but be patient, there will be someone along soon Quote Link to comment Share on other sites More sharing options...
Makkoness Posted January 2, 2009 Author CID Share Posted January 2, 2009 Hello everybody.. I've been trying different kinds of tweaks here and there but the fastest speed I have obtained is 396 Kbps only, I've used gourame and aronic's cablenut settings, I've also downloaded cFosspeed v.4.25 build 1431(having difficulty understanding this one ), also tweaked my canopy to DL rate 5000 and UL rate is 2000 (I have 7mb aggregate) also been changing base stations with the highest rssi (600+) and low jitter (3) but it has 150+ user counts, the other option is only 500+ rssi and 3-4 jitters with 120+ user counts but still could not attain speed greater than 400. Any expert users here want to give me advice? I've been a smartbro user since 2004 (the very day the elections was held LOL) and this is the first time since the first month this was installed that I've gotten a speed greater than 300. :angry: Any feedbacks would be very much appreciated. Quote Link to comment Share on other sites More sharing options...
Makkoness Posted January 2, 2009 Author CID Share Posted January 2, 2009 Also these are my APs I'm currently shifting from 35 and 36. because 36 always have huge amount of usercounts and 35 doesn't go above 600 so I don't have better options :cry:I could also go to 42 but the RSSI there is unstable going from 500-600 and jitter of 3-6. but still if you have suggestions please feel free to post. Current entry index: 2 ********************************************* Index: 0 Frequency: 5785.0 MHz ESN: 0a-00-3e-f2-36-02 Jitter: 5 RSSI: 629 Power Level: -72 Beacon Count: 8 BRcvW: 1 DFS: 0 FEC: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 695 SectorID: 3 Color Code: 42 BeaconVersion: 1 SectorUserCount: 90 Frequency: 5785 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3 ********************************************* Index: 1 Frequency: 5815.0 MHz ESN: 0a-00-3e-ff-11-b6 Jitter: 2 RSSI: 590 Power Level: -73 Beacon Count: 32 BRcvW: 1 DFS: 0 FEC: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 1470 SectorID: 2 Color Code: 35 BeaconVersion: 1 SectorUserCount: 46 Frequency: 5815 NumULHalfSlots: 17 NumDLHalfSlots: 52 NumULContSlots: 6 ********************************************* Index: 2 Frequency: 5840.0 MHz ESN: 0a-00-3e-f2-33-bf Jitter: 3 RSSI: 608 Power Level: -72 Beacon Count: 32 BRcvW: 1 DFS: 0 FEC: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 3871 feet TxBER: 1 EBcast: 0 Session Count: 2 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 161 SectorID: 1 Color Code: 36 BeaconVersion: 1 SectorUserCount: 166 Frequency: 5840 NumULHalfSlots: 17 NumDLHalfSlots: 52 NumULContSlots: 6 ********************************************* Index: 3 Frequency: 5760.0 MHz ESN: 0a-00-3e-f2-37-b1 Jitter: 9 RSSI: 390 Power Level: -77 Beacon Count: 8 BRcvW: 1 DFS: 1 FEC: 0 Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1 Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0 FrameNumber: 93 SectorID: 5 Color Code: 41 BeaconVersion: 1 SectorUserCount: 69 Frequency: 5760 NumULHalfSlots: 17 NumDLHalfSlots: 52 NumULContSlots: 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.