Jump to content
Sign in to follow this  
Guest aerodude

help me plz...

Recommended Posts

Guest aerodude

hey i know i been asking for lotz of help lately... cause im just not good at this internet crap...but anyways heres my story i got peoplepc to use as dial up,. for my game..and i go to turn my COMPUTER ON this morning and it had crashed somehow or w/e...but igot it back...and i lost everything.. now my speeds are low!!!

:::.. Download Stats ..:::

Connection is:: 656 Kbps about 0.7 Mbps (tested with 579 kB)

Download Speed is:: 80 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Thu Jun 16 04:22:38 CDT 2005

Bottom Line:: 12X faster than 56K 1MB download in 12.8 sec

Diagnosis: May need help : running at only 81.39 % of your hosts average (direcpc.com)

Validation Link:: https://testmy.net/stats/id-M9T3USG0J

:::.. Upload Stats ..:::

Connection is:: 28 Kbps about 0 Mbps (tested with 97 kB)

Upload Speed is:: 3 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Thu Jun 16 04:25:02 CDT 2005

Bottom Line:: 1X faster than 56K 1MB upload in 341.33 sec

Diagnosis: May need help : running at only 68.29 % of your hosts average (direcpc.com)

Validation Link:: https://testmy.net/stats/id-QG0Y9KOWB

i was getting 1.2MB-2.1MB...i been trying cablenut and stuff not working :( can u likek help on AIM o r somethin

Share this post


Link to post
Share on other sites

aerodude : Do the TCPIP analyzer test  at the site below.

https://www.speedguide.net/index.php

See if your  dial-up connection changed  the MTU&MSS & maybe RWIN to optimize them for dialup.

I don't know what faster connection you have But when connected with the faster connection your MTU  &MSS

Should be for cable MTU 1500  MSS 1460 

for PPPoE MTU 1492 MSS 1452 There are some different settings for XP with PPPoE If thats what you have get Van Buren to help you.

I'm not sure about satellite I think they're the same as cable.

If these are like they should be I don't know where the slow down came from.It may be how you connected both like through a USB hub or something .

Share this post


Link to post
Share on other sites
Guest aerodude

TCP options string = 0204058c

MTU = 1460

MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

MSS = 1420

MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 16000

RWIN Scaling (RFC1323) = 0 bits

Unscaled Receive Window = 16000

For optimum performance, consider changing RWIN to a multiple of MSS.

Other values for RWIN that might work well with your current MTU/MSS:

522560 (MSS x 46 * scale factor of 8)

261280 (MSS x 46 * scale factor of 4)

130640 (MSS x 46 * scale factor of 2)

65320 (MSS x 46) 

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 640 kbps (80 KBytes/s) @ 200ms

Your RcvWindow limits you to: 256 kbps (32 KBytes/s) @ 500ms

Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 244 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = OFF 

IP type of service field (RFC1349) = 00000000 (0)

:(help,,

Share this post


Link to post
Share on other sites
Guest aerodude

:::.. Download Stats ..:::

Connection is:: 1116 Kbps about 1.1 Mbps (tested with 1013 kB)

Download Speed is:: 136 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Thu Jun 16 23:03:33 CDT 2005

Bottom Line:: 20X faster than 56K 1MB download in 7.53 sec

Diagnosis: Awesome! 20% + : 38.63 % faster than the average for host (direcpc.com)

Validation Link:: https://testmy.net/stats/id-SGNE01LHU

im back :) thanks for  help man

Share this post


Link to post
Share on other sites

just FYI cholla, the test reads the MTU ans MSS from the DWay proxy servers, which is 1460 and 1420, respectively.  I could change my MTU to anything and I wouldn't see a difference on the test...

Share this post


Link to post
Share on other sites

php I'll try to keep that in mind or in my notes .Thats why I said he really shoud get someone with DWay to help.I wonder why the test reads the proxy servers instead of his PC?I guess that test isn't much use to DWay users.Odd that it got faster after aerodude did the test & adjusted something I guess.Looks like he's still having problems because he has another post right now.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...