Swimmer Posted December 7, 2003 CID Share Posted December 7, 2003 I have a nother question. I was visiting dslreports to do a tweak test. The only problem with my connection that they found was my Rwin value(256960) It told me to Choose RWIN between 14600 and 37960. I am on comcast 1.5/256 cable. Any ideas if i should change this or leave it alone. I am on a dlink Di-614+ router using cat 5 to this computer. Example 146000 byte download Actual data bytes sent: 146000 Actual data packets: 100 Max packet sent (MTU): 1500 Max packet recd (MTU): 1500 Retransmitted data packets: 0 sacks you sent: 0 pushed data pkts: 2 data transmit time: 0.277 secs our max idletime: 76.8 ms transfer rate: 252175 bytes/sec transfer rate: 2017 kbits/sec This is not a speed test! transfer efficiency: 100% Your Tweakable Settings: Receive Window (RWIN): 256960 Window Scaling: 2 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1460 TTL: (less any hops behind firewall) 64 TTL remaining: 53 ICMP (ping) check Minimum ping: 30 ms Maximum ping: 32 ms Ping stability: 31 30 30 31 30 31 30 31 30 32 Link to comment https://testmy.net/ipb/topic/75-rwin-values/ Share on other sites More sharing options...
CA3LE Posted December 7, 2003 CID Share Posted December 7, 2003 my RWIN is set to 256960 also... and I am running full throttle ~~ if you are getting a little lower or above your advertised speed... leave it alone Link to comment https://testmy.net/ipb/topic/75-rwin-values/#findComment-414 Share on other sites More sharing options...
MICROWAVE Posted December 8, 2003 CID Share Posted December 8, 2003 I think they put up the other numbers for fun kinda like throwing at the dart board. I guess their suggestions may help some people! microwave Link to comment https://testmy.net/ipb/topic/75-rwin-values/#findComment-426 Share on other sites More sharing options...
Recommended Posts