ikhan Posted November 7, 2005 CID Share Posted November 7, 2005 I have Juno Dial-up internet access . Juno provides 56 kbps but I can only get 28.8 kbps at the most the "Speed:" (under my Juno status window START>Connect to>Juno). Number in figure do not move, they've never gone above or below 28.8 kbps . So, Is my modem speed set to certain amount? which does not allow the internet to go faster then 28.8 kbps. My modem is Agere Win Modem (56 kbp/s compatible) Any suggestions.......Comments............ Link to comment Share on other sites More sharing options...
cholla Posted November 7, 2005 CID Share Posted November 7, 2005 ikhan: Welcome to the forum.Read some of the posts in the all dial-up section to find some tweaks.I did have a hardware modem that would only do 28.8 no matter what.My PCTel internal has alwas been faster .It usually connects at 40 or 41 & tests that part of the time.A major factor is the distance to the telco(terminal) that your Phone line is. What OS do you have? Do you know what kind of slot your modem is in PCI or ISA ? Is compression enabled or disabled? For some it works better enable (like me) & for others (like ROM-DOS) it works better disabled.I have windows ME(a 9X type OS) & ROM-DOS uses XP. Link to comment Share on other sites More sharing options...
ikhan Posted November 7, 2005 Author CID Share Posted November 7, 2005 I have Windows XP home Edition I don't know about slot but it says "Agere Win Modem [COM 3]" My Modem Compression is Enabled. Link to comment Share on other sites More sharing options...
cholla Posted November 7, 2005 CID Share Posted November 7, 2005 Dial-up settings These are for ME but some will be simular in XP.I hope you find some of it useful. Download & install Cablenut;use the ccs file for your OS & connection. I make these adjustments to Cablenut for a custom dial-up file if it doesn't make yours work better you can use the ones that it puts in automatically.On the RWIN use the one of the settings suggested by Link to comment Share on other sites More sharing options...
Recommended Posts