itchiemitten

fyi I couldn't connect with either voip router I will do as instructed

there is no internet connection to the computer now that it is hooked to the vonagae devise. There was a connection before we switched the cables to the voip

It would be much easier to hook it to another computer in the office if that is possible

Also don't know if it makes a difference but I don't have a cable from the yellow port of the 2nd vonage router going anywhere

still have the blinking lights on the voip devices and no phone connection

they are both just blinking every second or so

about every 1 or 1.5 seconds

On the voip routers On one I have ethernet and internet and the power light is blinking on the othe one I have internet no ethernet and the powerlight is blinking phone lights on both are dead

correction wrt54g version 2

yes it is the wr54g version 2

Yes the linksys router is 192.168.1..1

Ok done that

So should I take the cable from the 1st port of the first router and hook it up to the voip router and then link that router to the next voip router and then back to the linksys router?

Yes First I have the modem and the cat5 cable goes to the internet connection of the 1st linksys router, then on port 1 of that router I have a cat 5 cable that goes to port 1 of the 2nd linksys router Lets stop there for now and you can tell me if the 2nd linksys router now has priority or if we should hook things up differently

no everything is hooked up the way it was when we started. The cat 5 cable I used from one of the computers to access the voip routers is hooked back up the way it was in the beginning. I'll try to explain I have hook ups in different places in the room that all go back to a central station by the routers. The computer I used to access the voip routers is plugged back into one of the distant connections (for lack of better wording) which then is wired to the central station connection. Maybe what I need to do is unhook that connection from the linksys router and hook the voip router to that All my voip cables are hooked up the way they were

All my ports on the linksys routers are taken except for the internet connection port, The voip cable is already hooked to one of the ports. i think I might be missing something here

By hit i meant that I tried to access the phone line

FYI Just hit my phone lines and it says vonage devise has incorrect network settings, please consult your devise user guide

So far So good

Let's go for it

Did everything on second router as I did on first one. Hope that was right

ok Hopefully everything will go as smooth

I beg my pardon Everything on the lan came back, guess I'm a bit impatient

Ok Lan configuration is now blank

and then hit save?