Doomsday

Thanks.

I guess the whole file.

Possible a CSS File for 4meg download/384 upload?

Did a spyware scan and nothing came up. Restarted Modem Finished Defrag around 10 last night{started it at 9:40} Ran CCleaner,including the registry scan and found nothing.

Update: Still nothing comes up in TCP Optimizer

Usually, the little arm in the HD is the issue. That's what happened with those 3 Segates we had in a machine in the house. http://www.astro.ufl.edu/~ken/crash/ IBM DeathStar Platter Crash

I have the latest drivers,maybe possible of a re-download and re-install of the drivers might fix the problem. this isn't worrying me as much as last night when the computer acutally half-booted{HD's Started, but no exhuast/CPU Fan} Traced it to a bad molex connection that caused a problem. i had to run out to grab some extra molex connections at the local radio shack to re-wire the system cause my power supply doesn't have any male ends left and i didn't have any extra's around.

Sorry it took so long for a reply. Yes, Windows SP2. I'm using the onboard NForce for my motherboard which is the K7N2 Delta2-LSR

http://www.viperlair.com/reviews/misc/net/dlink/dgl4300/index.shtml I think i just seen this in the salepaper on sunday in best buy for $130 bucks.

I download TCP Optimizer for my computer and nothing comes up for i,just wanted to try it after uninstalling CableNut. Anyone have an idea what could be the problem?

i think that one got dropped in the store and put back onto the shelf, then i grabbed it.

This is the corded one that would only work up and down,not left to right. http://www.logitech.com/index.cfm/products/details/US/EN,CRID=2150,CONTENTID=5003 cordless one: http://www.logitech.com/index.cfm/products/details/US/EN,CRID=835,CONTENTID=10953 New Mouse: http://www.microsoft.com/hardware/mouseandkeyboard/productdetails.aspx?pid=041

i wish i could say the same quailty went for there mouses. broke about 2 of them only after a few months of service. had a corded trackball that only worked up and down, then had a cordless that kept losing signal. i guess quailty now is not an issues even with microsoft mouses, cause the new one i bought is acting up with the scrollwheel getting stuck.

I also have a DI-524 and mine did the same thing before i turned off WLAN cause i don't have wireless.

Update: Picked up a DI-524 for $30 bucks{good to know people sometimes} and just did a firmware update on it.

105 F Athlon XP 2500+ i was having issues with temp till i cleaned out my CPU Fan and Power Supply that had about 3 inches of dust on the top of it and inside it.

66-67 Barracuda

It's a Rampage.

I took this pic over at a local car show in another town close to mine, but i haven't seen it since then.

sorry,but the LCD is also broken.

it's old. i'm thinking around circa 1997-98

The latop in question is an old IBM Thinkpad{can't remember the model number}. My sister was using it back when she didn't have a computer and ended up breaking the A/C plug inside the case and the screen so i had to use the second input for a monitor. The last time i asked around the laptop would cost about the same as just buying a new one and also trying to get a battery is like pulling teeth without a dentist.

once the motor breaks in, i planned on getting the same rockers that were in the old motor which were Comp Cams Magnum Roller Rockers in 1.52 my dad at one time had a H-Pipe setup{this was when i was about 10 years old i think}and changed it over to the current setup after the H rotted out along with the rest of the system.

Straight Pipe: Basically just the headers,then onto a thrush pipe,then onto a 2 inch pipe and then routed to the side at a 45 degree angle. A good cam profile {for me aleast} was .383/.401. i'm really more into torque since the car is so heavy,but just enough not to blow the tranmission up {the turbo 350 i was told can only take about 400 torque} Actually,i asked my dad about the car.It was made in Canada. the color combine use to be Gold w/ White interior. the car actually belonged to my grandmother's father,then my dad got it and then i got it.

thanks. it took alot of work. It use to look like this: it took a few days to scrap offf all the oil and paint,clean it up and repaint it with gloss black paint. The valve covers pictured here are the same ones in the previous pic, i used some of that Nano-Polish and they cleaned up nicely.