php

welcome to the forum eaglesnest1999 your speed is ok, but what is your advertised speed?

I didnt check out any of the links posted so i dont know if you know the answer to this already, but it supports up to 2 wired controllers and 4 wireless

welcome to the forum whether it's good or bad depends on your advertised speed, what is it?

no, there is nothing you can do to get DirecWay's speed consistant

tried it before... most of the info doesnt work for my computer

download and upload varies significantly, normally its around 1000/25Kbps latency is anywhere from 700-3000

you don't need a special router or switch for DirecWay

No, i can see it... use this file, reboot

if you have the most recent drivers, thats the best you can do

right now i got 108/400 frames done, running about 6 minutes, 48 seconds a frame on my computer, i didnt check on the other 2 computers...

I keep mine on, but i have a surge protector, UPS, and another surge protector inbetween my computer and the wall... without a good surge protector you should definitely unplug it...

run this tweaktest and paste the URL here... https://www.speedguide.net/analyzer.php

dude... youre already 331Kbps over your cap... it doesnt get much better

whats your OS and connection type? Assuming windows xp and cable, try the attached file... remember to reboot after applying settings...

not much at all... its you out of the many thousands of others

Now I know where all of my upload speed went... :::.. Upload Stats ..::: Connection is:: 7 Kbps about 0 Mbps (tested with 97 kB) Upload Speed is:: 1 kB/s Tested From:: https://testmy.net/ (main) Test Time:: Tue May 10 21:49:55 EDT 2005 Bottom Line:: 0X faster than 56K 1MB upload in 1024 sec Diagnosis: May need help : running at only 16.67 % of your hosts average (direcpc.com) Validation Link:: https://testmy.net/stats/id-VGFUEPR7Y

welcome to the forum oobaldyoo Your speed looks a little low... do you have the 4000/384 package? Read here for tweaking info https://testmy.net/topic-2097

first of all... put the latest stable firmware on your router, not beta, and see if that fixes anything...

we all know that isn't true, you could at least make something up that was somewhat realistic

no, having a static ip won't help your speed

you usually have to reboot after applying any network changes

I do it all the time, occasionally i get a "You have already posted this" message, when I actually didnt... heh... 1400th post...

first of all, set the MTU back to 1492... for static ips, assuming you are running windows xp, open the network connections folder, right click on the connection you are using for your network (most likely Local Area Connection), click properties. In the "This connection uses the following items:" box, select Internet Protocol (TCP/IP) and click the properties button. Change the top radio button to Use the following ip address, enter an ip address (i would suggest 192.168.0.200 and go up 1 for each other computer, ex. 192.168.0.201) subnet mask should fill in automatically when you select it, if not, enter 255.255.255.0. your gateway will most likely be 192.168.0.1. you will also have to enter DNS servers, so click start-run-cmd, type ipconfig /all and make a note of the DNS servers. if there is more than one, put one in the preferred DNS server box and one in the alternate DNS server box. ok your way out of everything, and reboot.

cool, cuz im gonna be gone wednesday night through friday... plenty of idle time there...

any idea of when we can have this will be up and running?