Jump to content

Speed cap is done through modem?


REH

Recommended Posts

You can remove the cap set in place, however, that would be deemed illegal and would land you in court for stealing bandwidth (don't argue... you won't win in a court battle).  I won't say how to uncap your modem, but they are out there.

Aldephia is 3mbps cap, which is typical of many cable internet companies (though some have raised their download speeds to 4mbps).  The caps are set in place to distribute bandwidth evenly and effeciently... not where one person uses 10 mbps to saturate the network, therefore slowing others down.  However, upping the cap to 4mbps could send Aldephia the red flag (if they monitor) and they'd pull the plug on your service (probably something in the ToS).

Link to comment
Share on other sites

if you have the older moterolas there is a site that give's you alot of info on how to uncap it, there is a config file in your modem and if you can replace that file youll be able to uncap your modem. I do not recommend doing it though I did it with my old modem and they came and took the modem and make me use the newst moterola wich as of right now there unhackable, DO NOT try it I was let off but if I do it agian they said theyd take me to court. 

Link to comment
Share on other sites

When you power up your modem, your modem will contact a TFTP server, which will then request a config file that your modem will read in order to get it's settings.  This file contains the upload rate, download rate, etc.  Problem is, a lot of broadband modems will automatically update the flash bios, thereby disabling any attempt to upload your own config file because of protection (i've tried). 

Link to comment
Share on other sites

ur modem will contact a TFTP server, which will then request a config file that your modem will read in order to get it's settings.

Theere is a program where you make a TFTP server so it  then you are able to upload your file every time.

  REH ill get you the site sometime and send it to your PM use it at your own risk.

Link to comment
Share on other sites

Yep, basically tricks your modem into thinking you're the TFTP server... But has reno has said, use at your own risk.  If you get caught, you might get a warning, have your cap lowered, or lose your connection.  Not to mention you might land in court.

If you do decide to do it, don't be an idiot and set the cap to something OBVIOUS (like 7mbps while everyone else is 3mbps).  They may monitor usage how how much traffic is passing through the system.  Another advice would be to not leave the new cap rate on forever.  Maybe temporarily (like 2 days or so) so you won't run into trouble.

Link to comment
Share on other sites

even if you uncap for an hour they still have logs of your modem disconencting thenc oming back on the network without ever talking to their tftp server. I am on adelphia and i have a 4mb down 512kb up cap. (I am on the premiere plan, only cost $2 more per month for us)

Link to comment
Share on other sites

There are two really popular sites that offer the tools needed for uncapping.

I won't post the links, but the names are:

TheoryShare

&

TCNISO

Such tools they offer are:

DHCP Force

NETBoot

SnmpCfgAdmin 1.4

TFTPD32

ConfigEdit

CMFirm3

These tools are utilized to great extent when your firmware has been flashed using NetBoot. One site will try to convince you that a serial cable is needed to flash your firmware, when, in fact, it is not needed. This particular site generates most of its money from serial cables, pre hacked modems, Sigma 1.3 thru 1.5b firmware, and a host of other things, thus encouraging n00bs to buy their products. The other site just sales modems mainly.

Success has been reached mainly using the Surfboard cable modem series (SB3100, SB4100, SB4200, SB4220), although some people have reached their goal using certain RCA & 3COM cable modems. Until very recently, SB5100 cable modems had been unhackable. With the development of a TSOP Programmer dubbed "Blackcat", SB5100 cable modems are now added to the list of hackable, undetectable cable modems. The infamous Sigma firmware is being developed for the SB5100 cable modem and will be available soon.

A word of advice to those who plan to venture into the world of uncapping:

This should not be regarded as a hobby, or something to do just to have fun. If you are bandwidth starved, you may want to consider moving to Texas where you can get FIOS right now (ask Clarence about FIOS...he's blazing fast). Uncapping is against the law! Penalties can and in most cases will result in you being banned for life from your ISP and many others (especially if you use the same name). Jail or prison time is always an option. Don't think that you will get a tap on the wrist just because you claim you didn't know what you were doing. ISP's are fully aware that it is a technical & complex set of steps that are needed to be carried out in order for an individual to uncap his/her cable modem. They will be pissed off & will return fire immediately. Uncapping is not the thing to do and is recommended to evade it at all costs

Link to comment
Share on other sites

  • 1 month later...

Basically, as was said, it does go through your modem. Even for dsl.

This is what my modem page looks like

DSL Connect Rate (Down/Up)    3360 KBits/Sec by 864 KBits/Sec

If you "upcap" yourself, they will cut you off/court as was said

But there are some ISP's (who knows where) which do not cap you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...