VanBuren

dont piss me off .s1 VanBuren

Shit dont have to be a bad thing, if you dont like it i suggest you PM CA3LE and get a custom Status..... VanBuren

snipped your post .s1 you should know we dont want that language here VanBuren

i notice my score is 1 Mbps+ off compared to 12 MB test :::.. Download Stats ..::: Connection is:: 7708 Kbps about 7.7 Mbps (tested with 5983 KB) Download Speed is:: 941 KB/s Tested From:: http://www.testmy.net/ Test Time:: Wed Feb 02 2005 18:16:20 GMT+0100 Bottom Line:: 138X faster than 56K 1MB download in 1.09 sec Validation Link:: https://testmy.net/id-R857AKN4Z :::.. Download Stats ..::: Connection is:: 9235 Kbps about 9.2 Mbps (tested with 12160 KB) Download Speed is:: 1127 KB/s Tested From:: http://www.testmy.net/ [www.testmy.net] Bottom Line:: 165 times faster than 56K you can download 1MB in 0.91 second(s) Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=OD6JS2FQK VanBuren

how did you uninstall QoS? did you do it in gpedit.msc or did you uncheck it next to your TCP/IP protocol in your LAN properties? also try 100 Mbps full duplex, but all recomendations ive seen, says to use Half duplex directly to a modem and only FULL duplex if your using a router. VanBuren

not many pictures, dern i need a digital camera, scanning is just too much work hehe check here if you find some pic if you like, its my town http://www.lule

hey YepperZ and welcome to the forum follow these steps https://testmy.net/topic-2097 VanBuren

Disable QoS packet scheduler, if you connect your PC to a router, then use 100 Mbps full duplex on your NIC, and if you connect direct to modem use Auto, or try 10 or 100 Mbps half duplex for Cable. VanBuren

This topic has been moved to Make it Faster.... [iurl]https://testmy.net/forum/index.php?topic=2172.0[/iurl]

i used to run dual boot win 98 and xp, and runned NTFS and XP on c: and FAT32 on D: with win 98 win 98 cant read NTFS and the partition never showed up when i runned 98. so i figure i format c: to FAT 32 and reinstall XP on that. plugged in win 98 bootdisc and clouldnt find the NTFS partition it found the d: that i have win 98 installed on, reporting that as c: so i installed Partition magic on win 98 and formated it from that, somehow that program found it VanBuren

96 % down and 93% up be happy VanBuren

yea we are very few, im just messing

This is a list of Swedish ISP

cool did upload change anyting? VanBuren

cool do you use 100 Fullduplex or half duplex? and do you connect via a router to your cablemodem? VanBuren

have you manual set duplex on your NIC Indestructable? if you connect directly to a Cablemodem, then use Halfduplex and if you use a router, use full duplex to the router. for dsl its diffrent, some dsl connections are full duplex i suggest to use Auto if you dont have a problem with speed VanBuren

its looking good

hey RiverWar the Nitro uploadtest is abit off, running 10s outbound test (client to server) . . . . . 402.53Kb/s i dont think you go above cap upstream, i seen a few more that show inaccurate scores on upload from that test also this is off defaultreceivewindow 100740 and this tcpwindow 256960 anyways, i would like you to test this file, its Version 3 that i modifyed the TcpWindowsize ( there will be a version 4 soon cos i rebuild them as soon as i see a pattern ) open cablenut, click delete cablenut tweaks + save to registry now the adjuster suppose to be blank load this file i attach and click save to registry again ( its build for 4400 but probl work well for 4000 too, if not i will adjust it for ya ) reboot and check speed but up and down, use the 2992 KB test down and 1492 KB test up good luck VanBuren

try this, reload the version 3 tweak 3000 256 and change these TcpWindowSize to 64240 GlobalMaxTcpWindowSize to 64240 Tcp13230pts to 0 now click save to registry make a new speedtest, use the 2992 KB test downstream and 1492 KB test upstream VanBuren

you need cablenut to increase upload.... try this download and install Cablenut https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 download this attached file and unzip it to C:ProgramCablenut open cablenut adjuster, click delete cablenut tweaks and click save to registry now in top left corner click file, click load custom settings file, browse to C:ProgramCablenut and dubble click on the file you unzipped now you have a few values in adjuster, click save to registry again and reboot your pc make a new speedtest up and down, use 2992 KB test download and 2992 KB test upload also make a tweaktesta again and post result URL adress good luck VanBuren

you get more then you pay for downstream lets try to fix your upload, you need cablenut for that.... download and install Cablenut https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 download this attached file and unzip it to C:ProgramCablenut open cablenut adjuster, click delete cablenut tweaks and click save to registry now in top left corner click file, click load custom settings file, browse to C:ProgramCablenut and dubble click on the file you unzipped now you have a few values in adjuster, click save to registry again and reboot your pc make a new speedtest up and down, use 2992 KB test download and 1492 KB test upload also make a tweaktesta again and post result URL adress good luck VanBuren

good idea VanBuren

The things that i like most with Cablenut is that you can tweak AFD buffers, and like i said before adjust files to diffrent amount of bandwidth and MTU, MSS values to fully take a adventage of AFD buffertweak you need SP2, with AFD buffers you can tweak your upload, no other tweakprogram can do that http://www.broadbandnuts.com/index.php?board=4;action=display;threadid=3126 if you have a slow upload you probl reach 90% of 128, 256, 384, 512 Kbps with TCP optimizer, but its rare to see ppl with 768 Kbps + reach 90% of their uploadspeed without using cablenut. VanBuren

snipped your post, we dont want that kinda language here VanBuren

i use this, works very well http://www.ccleaner.com/ VanBuren