Jump to content

Post your speed from Smart Bro (wi fi)


just-
 Share

Recommended Posts

I can't even reach the 300+ club..Waah.!

Anyway the tech guy just left. He did nothing. He still cannot change the values of my uplink and donwlink burst in my Canopy page. Sigh. Though I can still tweak it..waah

In case you got a canopy sm new version, try these:

1. set your Sustained Uplink and Downlink data rates to 500 (both)

2. set your Uplink and Downlink Burst allocations to 1500 (both)

3. find an AP (color code) that is low on Jitter (1-3) & Power (-73 dbm or lower) and high on RSSI (600 or higher)

4. save then reboot canopy sm.

Link to post
Share on other sites

  • Replies 2.4k
  • Created
  • Last Reply

Top Posters In This Topic

:::.. Download Stats ..:::

Download Connection is:: 24 Kbps about 0 Mbps (tested with 97 kB)

Download Speed is:: 3 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2007/08/17 - 2:43am

Bottom Line:: 0X faster than 56K 1MB Download in 341.33 sec

Tested from a 97 kB file and took 32.969 seconds to complete

Download Diagnosis:: May need help : running at only 9.76 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-BW0T7KMCX

User Agent:: Opera/9.22 (Windows NT 5.1; U; en) [!]

Is this speed normal when its raining? Or is it because there are alot of Smart users logged on when it is raining? (You know, classes are suspended and alot of people are in their house surfing the net or playing online games.)

15 users on my AP:

Index: 1 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-34-40

Jitter: 7 RSSI: 367 Power Level: -80 Beacon Count: 6 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 6 Range: 7154 feet TxBER: 1 EBcast: 1

Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1216 SectorID: 4 Color Code: 10 BeaconVersion: 1 SectorUserCount: 15

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

Link to post
Share on other sites

to tell you the truth, this speed below is not surprising to me anymore. kinda getting used to it.

::::::::::.. Download Stats ..::::::::::

Download Connection is:: 132 Kbps about 0.1 Mbps (tested with 579 kB)

Download Speed is:: 16 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2007/08/17 - 2:53am

Bottom Line:: 2X faster than 56K 1MB Download in 64 sec

Tested from a 579 kB file and took 36.047 seconds to complete

Download Diagnosis:: May need help : running at only 53.88 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-3TK5Q1DXM

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6

i see babygurl has already posted her pic on the post ur mug thread. you guys want to do it too?

Link to post
Share on other sites

Is this speed normal when its raining? Or is it because there are alot of Smart users logged on when it is raining? (You know, classes are suspended and alot of people are in their house surfing the net or playing online games.)

15 users on my AP:

Index: 1 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-34-40

Jitter: 7 RSSI: 367 Power Level: -80 Beacon Count: 6 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 6 Range: 7154 feet TxBER: 1 EBcast: 1

Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1216 SectorID: 4 Color Code: 10 BeaconVersion: 1 SectorUserCount: 15

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

wow. very slow.

i think the culprit is your color code. you need to change it.

look for a color code that's low on jitter (3-1), low on power level (approx. -60) and high on RSSI (600+ or higher)

while very heavy rain affect speed. it will just be temporary.

Link to post
Share on other sites

to tell you the truth, this speed below is not surprising to me anymore. kinda getting used to it.

:::::::::::::::::.. Download Stats ..:::::::::::::::::

Download Connection is:: 132 Kbps about 0.1 Mbps (tested with 579 kB)

Download Speed is:: 16 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2007/08/17 - 2:53am

Bottom Line:: 2X faster than 56K 1MB Download in 64 sec

Tested from a 579 kB file and took 36.047 seconds to complete

Download Diagnosis:: May need help : running at only 53.88 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-3TK5Q1DXM

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6

have you tried using a proxy whenever your speed is slow just like what you've just posted?

Link to post
Share on other sites

hey, so far these two color codes are the closest to what you guys recommend:

Current entry index: 0

*********************************************

Index: 0 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-34-40

Jitter: 5 RSSI: 342 Power Level: -80 Beacon Count: 2 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 1 Range: 7203 feet TxBER: 1 EBcast: 1

Session Count: 3 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 325 SectorID: 4 Color Code: 10 BeaconVersion: 1 SectorUserCount: 20

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-16-df

Jitter: 5 RSSI: 405 Power Level: -79 Beacon Count: 5 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 698 SectorID: 4 Color Code: 148 BeaconVersion: 1 SectorUserCount: 28

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

:cry:

Link to post
Share on other sites

i'm also using firefox, i don't use IE anymore. you forgot to add a firefox version when you posted  proxy settings, so here.

1. Click Tools>Options>Advanced>Network

2. Under Connection, click Settings

3. Enable Manual Proxy Configuration

4. Under HTTP Proxy, enter proxy.meridian.ph, under port, enter 8080

5. Check Use This Proxy for All Server Protocols.

6. Click ok

Link to post
Share on other sites

@coolbuster

I already did what you said but nothing happened.

And take a look at these AP's that came out when rescanned:

Current entry index: 0

*********************************************

Index: 0 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-34-40

Jitter: 7 RSSI: 361 Power Level: -79 Beacon Count: 5 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 12 Range: 7203 feet TxBER: 1 EBcast: 1

Session Count: 4 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 2033 SectorID: 4 Color Code: 10 BeaconVersion: 1 SectorUserCount: 19

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-16-df

Jitter: 5 RSSI: 369 Power Level: -79 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 400 SectorID: 4 Color Code: 148 BeaconVersion: 1 SectorUserCount: 28

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 2 Frequency: 5775.0 MHz ESN: 0a-00-3e-f2-16-cd

Jitter: 10 RSSI: 408 Power Level: -78 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 0 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 899 SectorID: 5 Color Code: 149 BeaconVersion: 1 SectorUserCount: 7

Frequency: 5775 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 3 Frequency: 5775.0 MHz ESN: 0a-00-3e-f7-51-f4

Jitter: 8 RSSI: 305 Power Level: -80 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 0 Age: 2 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1551 SectorID: 2 Color Code: 92 BeaconVersion: 1 SectorUserCount: 19

Frequency: 5775 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 4 Frequency: 5795.0 MHz ESN: 0a-00-3e-f2-39-d7

Jitter: 11 RSSI: 540 Power Level: -75 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 0 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 970 SectorID: 2 Color Code: 116 BeaconVersion: 1 SectorUserCount: 43

Frequency: 5795 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

Why is it that they have high jitter levels? And does sector user count mean the number of people using that AP?

Link to post
Share on other sites

for the meantime your canopy antenna is not yet aligned to a better AP, go for color code 149

Index: 2 Frequency: 5775.0 MHz ESN: 0a-00-3e-f2-16-cd

Jitter: 10 RSSI: 408 Power Level: -78 Beacon Count: 1 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 0 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 899 SectorID: 5 Color Code: 149 BeaconVersion: 1 SectorUserCount: 7

Frequency: 5775 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share


×
×
  • Create New...