VanBuren

yea red is good, nice speed AWG VanBuren

hey iloveny161 what upload speed do you get here? Use the 1496 KB test I dont think you will go much faster down, your already at 91% of your cap, then add approx 10 % TCP overhead and your at 101 % VanBuren

nice speed no problem, keep visiting and tell your friends about this site VanBuren

try this aswell 768000 VanBuren

use 10 baseT if you connect your PC direct to the modem if you have a router, use 100 base tx full duplex VanBuren

Connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it depend on the ISP service unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL. If you are using a router make sure you have the latest firmware. VanBuren

try this open cablenut change DefaultReciveWindow to 824320 now click save to registry and reboot also test uploadspeed with 1496 KB test VanBuren

this is what i get :::.. Download Stats ..::: Connection is:: 615 Kbps about 0.6 Mbps (tested with 1496 KB) Download Speed is:: 75 KB/s Tested From:: http://www.testmy.net/ Test Time:: Mon Feb 14 2005 18:37:27 GMT+0100 Bottom Line:: 11X faster than 56K 1MB download in 13.65 sec Diagnosis: May need help : running at only 11.39 % of your hosts average (bredbandsbolaget.se) Validation Link:: https://testmy.net/id-7ELIPD1SO compared to my fastest :::.. Download Stats ..::: Connection is:: 9235 Kbps about 9.2 Mbps (tested with 12160 KB) Download Speed is:: 1127 KB/s Tested From:: http://www.testmy.net/ [www.testmy.net] Bottom Line:: 165 times faster than 56K you can download 1MB in 0.91 second(s) Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=OD6JS2FQK VanBuren

run this test http://www.dslreports.com/tweaks copy and paste result URL adress in your post! also make a traceroute start-run-cmd tracert testmy.net rightclick choose all, click enter paste all here VanBuren

test speed against other testservers aswell, route is fine, but it can be a issue in the planet network that dosent show up in traceroute I get crappy speed now aswell and route is not bad.... VanBuren

oh dern, your modem seems to be crazy do not restart it VanBuren

download and install Cablenut https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 download this attached file (Cable & DSL 4400 384.zip) and unzip it to C:ProgramCablenut now open cablenut, in top left corner, click file, click load custom settings file, browse to C:ProgramCablenut and dubble click on the file Cable & DSL 4400 384.ccs now click save to registry and reboot your pc VanBuren

hey and welcome to the forum make sure you got win xp SP2 installed download and install Cablenut https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 download this attached file (Cable & DSL 6000 768.zip) and unzip it to C:ProgramCablenut now open cablenut, in top left corner, click file, click load custom settings file, browse to C:ProgramCablenut and dubble click on the file Cable & DSL 6000 768.ccs now click save to registry and reboot your pc VanBuren

sign up here and make a linequality test http://www.dslreports.com/tools disable firewall during test, or config it to allow ICMP traffic "Line Packet Loss Testing Packet loss tests on your line, including identification of any problem routers en-route to you.." its free when you see result, copy URL adress and paste it here so we can see it VanBuren

leave the settings as they are now if you follow DSLR recommendations you will start loosing packets again and speed will slowdown VanBuren

hmm that trace looks good try this pathping testmy.net paste all here VanBuren

hey pitbull make a traceroute start-run-cmd type tracert testmy.net and hit enter right click choose all hit enter and paste it here VanBuren

you have some loss try this go to start-run-cmd type this pathping testmy.net and hit enter it will take a while to complete when done, right click choose all and hit enter paste all here VanBuren

no need for another thread https://testmy.net/topic-2461 thread is closed VanBuren

3 10 ms 101 ms 213 ms docsis-interconnect.regina.accesscomm.ca [24.72. 99.249] that node seems unstable do that nitro speedtest again, after its done click Statistic and More info, copy all text from that and paste it here VanBuren

that is 92 % of your cap and very good, you need to att TCP overhead of approx 10% so you get what you pay for VanBuren

try this file unzip it to C:ProgramCablenut and load it from adjuster, after that click save to registry and reboot make a new speed and tweaktest VanBuren

what speed do you get now? VanBuren

do you have a cap both upstream and downstream of 64 Kbps? try this open cablenut adjuster, click delete cablenut tweaks and click save to registry now reboot your pc do a new tweaktest, and post result VanBuren

try this instead http://forums.speedguide.net:8117/ copy all text and paste it here VanBuren