lorne

I have got a selection of ram in this thing right now, the RAM that came with it is Elpida 128MB, PC100, CAS:3,2,2,10. I went and got a couple more sticks today of Transcend, 128MB, PC133, same CAS. So mort when you mean tighten up the timings do you mean take the CAS down like 2.5,1.5,1.5,9 from 3,2,2,10. ? Oh the 2 sticks of RAM I picked up today made no difference in anything any idea what might be wrong Thanks for the help

Yeah i will let you know how it goes, unless i toast it in which case i will be dead. Utterly destroyed by the girlfriend

Thanks for the help guys, I'm just wanna take the fsb up a little bit and see if it makes much of a difference. I will keep a close eye on temps and if it starts running warm and stressing the CPU i will back it off. Pretty much i am just curious Mort your right they did lock the multipliers, I will have to play with the fsb. Right now for some reason I can't access the CPU speed selection in Bios. I think maybe whoever installed this Mobo disabled the jumper free mode. I will have to open the case up and see if the little switch is the right way for jumper free. My comp runs at CPU: 39-40 Deg C underload so maybe if I just take the FSB up a bit I might be OK without xtra fans. What do you guys think Thanks again for the help

Hello Is anybody out there

coolboy I'm capped at 10MB down/1 up but i don't get the speeds you get, and i have tweeked my connection. What kind of system are you running

Yeah I would like to know what is producing those speeds to. Come on coolboy sharing is cool

SPECS CPU: PENTIUM 3E 550MHz ALIAS- Coppermine MOTHERBOARD: ASUS P3B-F, Jumper Free, Front Side Bus Properties- BUS TYPE (Intel GTL+), BUS WIDTH ( 64 BIT), REAL CLOCK (100MHz), EFFECTIVE CLOCK (100MHz), Memory Bus Properties- SDR SDRAM, BUS WIDTH (64 BIT), Clocks are same as FSB, Bandwidth (800MB/sec), CHIPSET i440BX. MEMORY: ELPIDA 128 MB, UNBUFFERED, SDRAM, PC 100, Timing (3,2,2,10) TEMPS AT IDLE CPU: 24 Deg C, MOBO: 23 Deg C TEMPS under Load: CPU: 37 Deg C, MOBO: 23 Deg C I would like to Overclock it a little, and add some memory, any ideas on memory. And what do you think about Overclocking it ? Any help would be appreciated

Yeah that upload is insane

Your Welcome

I can't really tell you which ones to try since everybodys connection is different. It just takes some time and patience. What works for one person might not work for another so you can't really go by what works for other people. Go to the link below about halfway down the page that this link takes you to are all the meanings of the different settings. From ther its all about trying out different settings and seeing what works and what doesnt. http://www.broadbandnuts.com/index.php?page=tiptrix

I gotta change my above statement from nice score to wicked score sinc your advertised is 3000 down. xtra bandwidth rocks so cox rocks

The best one that I know of for dialup is the cablenut program. If you haven't already read the faq on it and learn what all the settings are and play around with them. Although with your ping time as high as it is your probably not going to get any faster. Although I hope you prove me wrong You scanned for viruses but did you scan for spyware even if you did i would do it again with these 3 programs http://lavasoft.element5.com/software/adaware/ http://www.safer-networking.org/index.php?lang=en&page=download http://www.javacoolsoftware.com/spywareblaster.html

Microwave I don't know about other people but that is what i would be like after doing the same job for 40 years. Even my current job building performance engines which i love to do. I wouldn't be able to do for more than 10-15 years without my brain ending up like the above mentioned. I don't know maybe i just get bored fast. But if TestMy.net is around for 15-20 years I will still be posting. STRANGE

Datagg Nice score, and welcome to the forum. What is your advertised speed with cox ?

Shut up squirrel little pig with your tail stuck in the fence im going to eat you as soon as little bo peep lets me out of jail.Where did my leg go oh yeah i fed it to molly who sat on her trumpet. Just a little taste of CA3LES mind after 40 years of selling cable

Hell 2000 no prob CA3LE, It's just a matter of time. I think it probably grows in proportion to amount of users. The more users you have the more people are likely to hear about it. Once you reach 200 I think it is going to rocket from yhere. And I can't see anybody who visits this site than see's what others are like not coming back.You'll be able to say good-bye to your 9to5 before you know it

PONTIAC ROCKS as long as it is in the form of the 1970 & a half 550 hp, 800 hp when you hit the little red button

Fat Man on a Little Bike- 7outa10 pretty funny where was the smokeshow lol Staple Arm- What can I say Fuc#@$ up Short Guy in a Little Dress- gotta give him8outa10 for that. Man if he would have done that in my neighbourhood he would have got shot Gotta say thats some funny shit

The deal Swimmer posted is probably the best your going to find. And it is for a cable connection which is better than DSL. Although I'm sure there are people who would disagree with me. But they would be wrong

Welcome Sinocide nice first couple of posts

Ice I think you can use any Avatar you want from where ever you want as long as it follows this Displays a small graphic image below your details in posts. Only one image can be displayed at a time, its width can be no greater than 100 pixels, the height no greater than 100 pixels, and the file size no more than 6 KB.

RaWDIZ Don't know what area you live in, but from what i've heard and read get cable from cox. They are the best If you have any questions about cox post them and CA3LE will be able to answer them. He works for cox cable

Microwave As usual you have something cool and informative to say, Thanks again

Mort Ahhh... I understand now. Thanks for the tip

Mort Thanks for the info, looks like i better do some more research before i try mmoddin the Bios