mudmanc4 Posted February 8, 2009 CID Share Posted February 8, 2009 I also noticed I have a Secondary IDE Channel: Device 0 Device Type: Auto Detection Transfer Mode: DMA if available Current Transfer Mode: Ultra DMA Mode 2 Device 1 Device Type: None Transfer Mode: DMA if available Current Transfer Mode: Not Applicable Well which IDE port contains the HDD were mounted to ? Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 8, 2009 Author CID Share Posted February 8, 2009 Well which IDE port contains the HDD were mounted to ? ??? How do I find this out? Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 8, 2009 CID Share Posted February 8, 2009 ??? How do I find this out? You have one Hard drive right ? Then the mounted OS should be on dev 0 port 1 on the motherboard. I'm assuming this unless you tell me you built this computer....... Lets just go back a bit. Were delving into things that are the next step, my fault. What video card do you have ? Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 8, 2009 Author CID Share Posted February 8, 2009 You have one Hard drive right ? Then the mounted OS should be on dev 0 port 1 on the motherboard. I'm assuming this unless you tell me you built this computer....... Lets just go back a bit. Were delving into things that are the next step, my fault. What video card do you have ? This may sound crazy but how do I find out my video card or what my current video card is? I basically did almost all of the updates DriverMax offered. I am just drawing up a blank on finding out my current video card. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 8, 2009 Author CID Share Posted February 8, 2009 You have one Hard drive right ? Then the mounted OS should be on dev 0 port 1 on the motherboard. I'm assuming this unless you tell me you built this computer....... Lets just go back a bit. Were delving into things that are the next step, my fault. What video card do you have ? Also, I do just have one hard drive AND I have 768 as my virtual drive. Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 8, 2009 CID Share Posted February 8, 2009 This may sound crazy but how do I find out my video card or what my current video card is? I basically did almost all of the updates DriverMax offered. I am just drawing up a blank on finding out my current video card. OK then , there's a couple ways to get there, right click on the desktop, click properties, then settings , then advanced, then adapter. This should show the info we need. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 8, 2009 Author CID Share Posted February 8, 2009 OK then , there's a couple ways to get there, right click on the desktop, click properties, then settings , then advanced, then adapter. This should show the info we need. Got It! Adapter Type Intel{R} 82865G Graphics Controller Adapter Information Chip Type: Intel{R} 82865G Graphics Controller DAC Type: Internal Memory Size: 96 MB Adapter String: Intel {R} 82865G Graphics Controller Bios Information: Intel Video BIOS Quote Link to comment Share on other sites More sharing options...
tdawnaz Posted February 8, 2009 CID Share Posted February 8, 2009 oops Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 8, 2009 Author CID Share Posted February 8, 2009 oops ?? Quote Link to comment Share on other sites More sharing options...
zalternate Posted February 8, 2009 CID Share Posted February 8, 2009 She posted in the wrong thread. So now you think it's a big problem with your graphic statistics.. But then again the time code is off from the other thread of http://www.testmy.net/forum/index.php?topic=25722.msg295825;topicseen#msg295825 I have a ATI Radeon 9550 With 256MB memory size. Internal DAC (400MHz). AGP slot Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 9, 2009 CID Share Posted February 9, 2009 Got It! Adapter Type Intel{R} 82865G Graphics Controller Adapter Information Chip Type: Intel{R} 82865G Graphics Controller DAC Type: Internal Memory Size: 96 MB Adapter String: Intel {R} 82865G Graphics Controller Bios Information: Intel Video BIOS It's not a whole lot of video memory, so driver choice is gonna be a key player. Here's the Intel driver site, look on the page for the intel driver update utility, You might want to try what they have to offer, no matter what your using right now. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 9, 2009 Author CID Share Posted February 9, 2009 It's not a whole lot of video memory, so driver choice is gonna be a key player. Here's the Intel driver site, look on the page for the intel driver update utility, You might want to try what they have to offer, no matter what your using right now. I updated it to the version they had and now it reads like the same: Adapter Type Intel{R} 82865G Graphics Controller Adapter Information Chip Type: Intel{R} 82865G Graphics Controller DAC Type: Internal Memory Size: 96 MB Adapter String: Intel {R} 82865G Graphics Controller Bios Information: Intel Video BIOS BUT!!!! I pull it up on through Device Manager and properties and I get this: Intel{R} 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570 Device type: System devices Manufacturer: Intel Location: PCI bus 0, device 0, function 0 Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 9, 2009 Author CID Share Posted February 9, 2009 It also states: Driver Date: 12/22/2008 Driver Version: 9.1.1.1004 Digital Signer: Not Digitally signed Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 9, 2009 CID Share Posted February 9, 2009 So with the new driver how are the pictures loading ? Don't look at those 0's like they mean nothing, because in a computer a 0 means the firsts device or an address. And binary numbers, but not here. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 9, 2009 Author CID Share Posted February 9, 2009 So with the new driver how are the pictures loading ? Don't look at those 0's like they mean nothing, because in a computer a 0 means the firsts device or an address. And binary numbers, but not here. ...EVERYTHING IS STILL CHOPY!!! Sorry for yelling. It didn't used to be like this. That is what is so frustrating. Pages used to pop up like lightning. Quote Link to comment Share on other sites More sharing options...
Buntz Posted February 9, 2009 CID Share Posted February 9, 2009 Is this a laptop? Who made it and what is the model number? Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 9, 2009 Author CID Share Posted February 9, 2009 Is this a laptop? Who made it and what is the model number? No. It's a standalone Dell desktop. Quote Link to comment Share on other sites More sharing options...
Buntz Posted February 9, 2009 CID Share Posted February 9, 2009 Try going to the dell website and download the video drivers from them. They maybe older driver, but at lease they should work. If you can get back far enough, you can try a system restore to a date before you notice the slow down. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 10, 2009 Author CID Share Posted February 10, 2009 Try going to the dell website and download the video drivers from them. They maybe older driver, but at lease they should work. If you can get back far enough, you can try a system restore to a date before you notice the slow down. I went there and I also made some changes. Here are all the details of my driver info: Human Interface Devices Driver USB Human Interface Device 5.1.2600.2180 IDE ATA/ATAPI controllers Driver Intel® 82801EB Ultra ATA Storage Controllers 9.1.1.1004 Intel® 82801EB Ultra ATA Storage Controllers - 24D1 5.1.2600.5512 IEEE 1284.4 compatible printers Driver Officejet 5600 (DOT4PRINT) 50.0.135.0 Officejet 5600 series (DOT4PRT) 50.0.135.0 IEEE 1284.4 devices Driver Officejet 5600 series (DOT4) 50.0.135.0 Imaging devices Driver HP Officejet 5600 series #2 50.0.135.0 Mice and other pointing devices Driver HID-compliant mouse 5.1.2600.0 Modems Driver Intel® 537EP V9x DF PCI Modem 2.15.36.2 Network adapters Driver Intel® PRO/100 VE Network Connection 8.0.47.0 Sound, video and game controllers Driver SoundMAX Integrated Digital Audio 5.12.1.3600 System devices Driver Intel® 82801EB LPC Interface Controller - 24D0 9.1.1.1004 Intel® 82801EB SMBus Controller - 24D3 9.1.1.1004 Intel® 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570 9.1.1.1004 Intel® 82801 PCI Bridge - 244E 9.1.1.1004 Universal Serial Bus controllers Driver Intel® 82801EB USB Universal Host Controller - 24D4 9.1.1.1004 Intel® 82801EB USB Universal Host Controller - 24D7 9.1.1.1004 Intel® 82801EB USB2 Enhanced Host Controller - 24DD 9.1.1.1004 Intel® 82801EB USB Universal Host Controller - 24D2 9.1.1.1004 Intel® 82801EB USB Universal Host Controller - 24DE 9.1.1.1004 USB Printing Support 5.1.2600.0 Officejet 5600 series (DOT4USB) 9.0.0.0 USB Composite Device 5.1.2600.0 Quote Link to comment Share on other sites More sharing options...
Buntz Posted February 10, 2009 CID Share Posted February 10, 2009 Mudmanc4 pretty much cover everything. Does the flash video work alright on the NBA.com site? Quote Link to comment Share on other sites More sharing options...
Buntz Posted February 10, 2009 CID Share Posted February 10, 2009 I just did A tracert to nba.com and got this. When I try to ping the site they all timed out. It may be the web site. Give it a try and see what you get. I also ran the same tests to TMN and had no problems. Microsoft Windows [Version 6.1.7000] Copyright © 2006 Microsoft Corporation. All rights reserved. C:UsersBuntz>tracert nba.com Tracing route to nba.com [157.166.255.11] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 * * * Request timed out. 3 8 ms 6 ms 7 ms 68.85.152.145 4 10 ms 9 ms 9 ms po-90-ur01.middletown.nj.panjde.comcast.net [68. 86.210.157] 5 10 ms 9 ms 9 ms po-80-ar01.eatontown.nj.panjde.comcast.net [68.8 6.210.153] 6 15 ms 16 ms 13 ms po-90-ar01.verona.nj.panjde.comcast.net [68.86.2 08.9] 7 13 ms 12 ms 13 ms pos-0-11-0-0.ar01.plainfield.nj.panjde.comcast.n et [68.86.153.98] 8 14 ms 14 ms 13 ms pos-0-7-0-0-cr01.newyork.ny.ibone.comcast.net [6 8.86.90.29] 9 13 ms 14 ms 13 ms xe-11-1-0.edge1.NewYork2.Level3.net [4.71.186.13 ] 10 21 ms 17 ms 18 ms vlan89.csw3.NewYork1.Level3.net [4.68.16.190] 11 13 ms 13 ms 14 ms ae-81-81.ebr1.NewYork1.Level3.net [4.69.134.73] 12 31 ms 34 ms 17 ms ae-3-3.ebr4.Washington1.Level3.net [4.69.132.93] 13 22 ms 17 ms 18 ms ae-94-94.csw4.Washington1.Level3.net [4.69.134.1 90] 14 21 ms 19 ms 19 ms ae-91-91.ebr1.Washington1.Level3.net [4.69.134.1 41] 15 43 ms 35 ms 35 ms ae-2.ebr3.Atlanta2.Level3.net [4.69.132.85] 16 34 ms 33 ms 33 ms ae-21-52.car1.Atlanta1.Level3.net [4.68.103.34] 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 10, 2009 CID Share Posted February 10, 2009 Now goto the very bottom of the page and take a screenshot of the text that starts with " Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 10, 2009 Author CID Share Posted February 10, 2009 Now goto the very bottom of the page and take a screenshot of the text that starts with " Quote Link to comment Share on other sites More sharing options...
mudmanc4 Posted February 10, 2009 CID Share Posted February 10, 2009 Yes, that is the section, but why would u choose to exclude the pageload information. I was attempting to see what speed the page was served to you. Please try again, and include all of the information down there. Quote Link to comment Share on other sites More sharing options...
sharky2009 Posted February 10, 2009 Author CID Share Posted February 10, 2009 Yes, that is the section, but why would u choose to exclude the pageload information. I was attempting to see what speed the page was served to you. Please try again, and include all of the information down there. Ooops sorry. Here it is... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.