Jump to content

Recommended Posts

sorry for the double post but i cannot see the edit button here in tmn  :wink: again at Mr. CB can you help me with my ap?!? heres the ap

Current entry index: 2

*********************************************

Index: 0 Frequency: 5755.00 MHz ESN: 0a-00-3e-f2-3a-17

Jitter: 7 RSSI: 451 Power Level: -78 Beacon Count: 14 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1515 SectorID: 3 Color Code: 8 BeaconVersion: 1 SectorUserCount: 37

NumULHalfSlots: 19 NumDLHalfSlots: 57 NumULContSlots: 0

*********************************************

Index: 1 Frequency: 5795.00 MHz ESN: 0a-00-3e-f2-36-9f

Jitter: 5 RSSI: 461 Power Level: -78 Beacon Count: 2 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 485 SectorID: 2 Color Code: 110 BeaconVersion: 1 SectorUserCount: 54

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 2 Frequency: 5835.00 MHz ESN: 0a-00-3e-f2-36-9e

Jitter: 3 RSSI: 578 Power Level: -75 Beacon Count: 5 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 1 Range: 1764 feet TxBER: 1 EBcast: 1

Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1389 SectorID: 3 Color Code: 111 BeaconVersion: 1 SectorUserCount: 55

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

Can someone help me break the 384 barrier. I've tried doing the tweaks but i can't get past that barrier...

you cant go pass 384 since that is the one that is allocated to you.. you can only change 384 if you have access to the access point (cell sites).  the tweaks will just make sure that the 384 that you get will be utilized by you.

some access points has been upgraded to 512. so once again, lucky are those people!

help w/ my smartbro internet.. when downloading, it always get disconnects or not receiving and sending packets.. help me! newbie hir! is memory affects my internet? and when i test my net, my test score {72Kbps (9 kB/s)}.. i also tried the steps..

help w/ my smartbro internet.. when downloading, it always get disconnects or not receiving and sending packets.. help me! newbie hir! is memory affects my internet? and when i test my net, my test score {72Kbps (9 kB/s)}.. i also tried the steps..

hi chez.piol  :welcome: to TMN

what anti-virus program are you using?

please post a screenshot of your Task Manager - Processes  :smiley:

tnx for the welcome..

here's the image of my processes..

I'm using a NOD anti-virus.. i already tried changing my color code but i don't know what to put.. hehehe..

my color code is 20.. what number will i replace?

I'm from (laoag city) :grin:.. i need a fast reply...plsss...

tnx for the welcome..

here's the image of my processes..

I'm using a NOD anti-virus.. i already tried changing my color code but i don't know what to put.. hehehe..

my color code is 20.. what number will i replace?

I'm from (laoag city) :grin:.. i need a fast reply...plsss...

i already fixed it i just change its color code to 21... but i want to boost it... from 333Kbps to 500Kbps... i already tried on how to tweak but nothing happens.. is there some other way to boost it? tnx...

you can't go from 333 to 500 unless smartbro do some physical changes on your locations AP. the tweaks offered in this site will just help you maximize the allocated speed to make sure that the 384 that was given to you will be utilized the way you want it.

Anyway, heres my AP Evals:

*********************************************

Index: 0 Frequency: 5755.00 MHz ESN:

Jitter: 2 RSSI: 1606 Power Level: -45 Beacon Count: 4 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 882 feet TxBER: 1 EBcast: 1

Session Count: 2 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 563 SectorID: 1 Color Code: xx BeaconVersion: 1 SectorUserCount: 26

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5795.00 MHz ESN:

Jitter: 4 RSSI: 1959 Power Level: -39 Beacon Count: 29 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 173 SectorID: 2 Color Code: xx BeaconVersion: 1 SectorUserCount: 18

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

which one is better?

Anyway, heres my AP Evals:

*********************************************

Index: 0 Frequency: 5755.00 MHz ESN:

Jitter: 2 RSSI: 1606 Power Level: -45 Beacon Count: 4 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 882 feet TxBER: 1 EBcast: 1

Session Count: 2 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 563 SectorID: 1 Color Code: xx BeaconVersion: 1 SectorUserCount: 26

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5795.00 MHz ESN:

Jitter: 4 RSSI: 1959 Power Level: -39 Beacon Count: 29 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 173 SectorID: 2 Color Code: xx BeaconVersion: 1 SectorUserCount: 18

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

which one is better?

i go for the first one.. whats with the XX color code? lol

the first one is better since it has low jitter. though it has 26 user connected still it remains to be the best option for you.. jitter should be the primary concern. the lower the jitter the smoother the signal goes in.

Guest
This topic is now closed to further replies.
×
×
  • Create New...